Sper Scientific 840047 3-Axis RF Meter

Brand:Sper Scientific

2.1/5

322.86

Μετρήστε την ισχύ ραδιοσυχνοτήτων Wi-Fi και LAN, κινητών τηλεφώνων, πύργων μετάδοσης ραδιοφώνου και τηλεόρασης, ασύρματων καμερών και μικροφώνων. Ο μετρητής RF 3-Axis 840047 της Sper Scientific μετρά την ένταση του ηλεκτρομαγνητικού πεδίου RF (Radio Frequency) στην περιοχή συχνοτήτων από 50 MHz έως 3,5 GHz. Ο αισθητήρας 3 αξόνων παρέχει απλή, ακριβή, μη κατευθυντική μέτρηση από οποιαδήποτε γωνία. Τα αποτελέσματα εμφανίζονται με μεγάλα ψηφία και ένα γράφημα ράβδων σε μια οπίσθια φωτιζόμενη οθόνη LCD που υποδεικνύει επίσης μέγιστες ή μέσες ενδείξεις, χαμηλή μπαταρία και υπερφόρτωση. Μπορείτε να ρυθμίσετε τους ηχητικούς συναγερμούς έναν παράγοντα CAL (βαθμονόμηση) για μια συγκεκριμένη συχνότητα ή να αποθηκεύσετε και να ελέγξετε έως και 200 ​​μετρήσεις απευθείας στο μετρητή. Αυτόματη εμβέλεια, με αυτόματη απενεργοποίηση. Έρχεται έτοιμο για χρήση σε μαλακή θήκη μεταφοράς με θηλιά ζώνης, εγχειρίδιο οδηγιών και μία μπαταρία 9V. Διαστάσεις: 7¾ × 2½ × 2½ (197 × 64 × 64 mm) Βάρος: 10,3 oz (292 g).

Δεν υπάρχουν διαθέσιμες μονάδες
Μετρήστε την ισχύ RF του Wi-Fi και του LAN, του κινητού τηλεφώνου, του ραδιοφώνου και. Ακρίβεια: ±2,4dB (50 MHz ~ 1,9 GHz) ±1,0 dB (1,9 GHz ~ 3,5 GHz). Ανάλυση: 0,1 mV/m
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number CECOMINOD053542
Manufacturer Sper Scientific
Package Dimensions 9.49 x 5.43 x 3.78 inches; 1.01 Pounds

2.1

2 Review
5 Star
52
4 Star
0
3 Star
0
2 Star
0
1 Star
48

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Andreas Pechtold
protect yourself from high frequency EMR
Very interesting device. My WiFi access point measures 12 Volts per meter (V/m) right above and 0.437 V/m or 437 mV/m two meters away. Or in microwatts per centimeter squared (μW/cm2) = 33 μW/cm2 above and 0.031 μW/cm2 2 meters away. These values were determined by using the MAX function of the display. Bioinitiative.org determined in 2007 that 0.1 μW/cm2 was the maximum value acceptable for the public but revised that value downwards in 2014. Seeing these values I switched my WiFi off and use only the cable to the LAN network. (RJ-45 connector). I then only have the background radiation from my neighbors that amount to 9 mV/m or 0.15 μW/m2 (not measurable per cm2). The cell phone mast at my local train station emits 2.7 V/m. Around this mast (30 meters high) nature appears to be stone dead : no birds, cats insects or other sign of life). So with this meter you can investigate your own surroundings but the new frequency of 5.8 GHz can not be measured as the range of this meter goes from 50 MHz to 3.5 GHz.
Scritto da: mrwilson
Perfect for use in the mirror universe.
Seriously, what does that mean. It's printed on a sphere. Why not just indicate the directions of the axes in the actual physical directions. Instead, there's a 2d projection of a 3d reference frame that can't actually mean anything. Also, it's a LEFT HANDED coordinate system! WTF?!

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array