Σετ εκκίνησης MLCS 200 Solid Carbide Spiral Upcut Bit Starter, 3-Pece

Name: Σετ εκκίνησης MLCS 200 Solid Carbide Spiral Upcut Bit Starter, 3-Pece
Brand: MLCS
SKU: 0718122842759
Price: 159.80 EUR
Availability: InStock

Brand:MLCS

3.6/5

€
159.80

ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Τρεις συμπαγείς μύτες καρβιδίου μικροκοκκίων για γρήγορες, λείες κοπές και μια άκρη που παραμένει αιχμηρή περισσότερο. Τα σπειροειδή κομμάτια παράγουν μια πολύ καθαρή και ακριβή κοπή με ελάχιστη φλυαρία. Το σπειροειδές κοπής βοηθά στην αφαίρεση υλικού από το αυλάκι. Λειτουργούν καλά για βαθιές νεκροτομές, κόψιμο μπαμπά σε τραπέζι δρομολογητή και κάθε επεξεργασία άκρων που γίνεται με την εργασία στραμμένη προς τα πάνω. Περιλαμβάνει τα ακόλουθα bit UPCUT διαμέτρου: 1/4-ίντσα D (μήκος κοπής 1 ίντσας, στέλεχος 1/4 ίντσας), 1/2-ίντσα D (1-1/2-ίντσα μήκος κοπής, 1/2-ίντσα στέλεχος) και 3/8-ιντσών D (μήκος κοπής 1-1/4-ίντσας, στέλεχος 1/2-ίντσας).

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0718122842759

Κατηγορίες Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Αξεσουάρ ρούτερ, Router Bits, Διατρητές ευθ, Σπειροειδής & τελειώματα μπιτ, Σπειροειδής,

Στελέχη 1/4 ίντσας και 1/2 ίντσας. Αφαιρέστε το πριονίδι και τα ροκανίδια από τις βυθιζόμενες τομές με διάτμηση προς τα πάνω. Ιδανικό για βαθιές νεκρώσεις και κόψιμο μπαμπά σε τραπέζι ρούτερ. Περιλαμβάνονται 3 δημοφιλή μεγέθη: 1/4-Inch, 3/8-Inch, 1/2-Inch διάμετρος. Το στερεό μικροκαρβίδιο κόκκων κόβει λεία και παραμένει αιχμηρό.

Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 208 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎200
Item Package Quantity	‎1
Item Weight	‎8.8 ounces
Manufacturer	‎MLCS
Material	‎Carbide
Number Of Pieces	‎3
Package Dimensions	‎3.7 x 2.1 x 0.5 inches
Part Number	‎200

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Randy Foxx

very sharp and good value

I cut my first box joint with one of these bits. Cutting maple was like slicing bread with a sharp knife. I definately recommend these bits.

Scritto da: Lawrence Bolger

Perfect for my project

Used these in my RotoZip to create Halloween décor in PVC so wanted up cut.

Scritto da: Dennis Gottschalk

Value sprial router bit set.

The bits produce a decent cut for the cost on box joints.

Scritto da: JIM MORGAN

2 of 3 bits are very good

The two smaller bits have been very good tools. however, the 1/2" bit went dull the first time I used it (on pine, no less, at 1/4 " depth!). the tip burned and the rest will barely even cut. very uneven quality, which is disappointing since I have always been very pleased with mlcs products before. update! since the above review, I have found mlcs has a 3 year warranty that they honor even if you purchase through amazon. they acted quickly and I am being shipped a brand new bit. outstanding! review now is 5 stars.

Scritto da: Mike

Great bits for cutting box joints

I needed a 1/4" bit for my new box joint jig and looked at this set since it had all of the sizes I needed. The cuts were perfect and the box went together easily. Still sharp after over 100 cuts!

Scritto da: Michel Theunissen

Works great on plywood, no more tear-out

I tried using these bits on plywood and the results were great. No more tear-out. Unfortunately, they did not cut through hardwood nicely without shredding the edges off. I was using 3/4" white oak to make box joints, and just ripped them out horribly. Then I used the same bits on 1/2" plywood and seemed to create smooth edges. I gave 5 stars because I bought them for my plywood issues. For hardwood, I just use quality straight bits.

Scritto da: Richard B

Work Great For Box Joints

The uncut sale of these make them perfect for cutting box joints. These are very sharp and appear to be well made. A nice purchase for the price.

Scritto da: Grumpymike

Spiral up cut router bits by MLCS

I purchased these bits to be used in my box joint jig. (Some folks call them 'finger joints'). I have found them to be a good 'Utility Grade' bit at an affordable price, and will serve me well. These bits are not meant to be used in a production line, but for guys like me who use them for a few hours at a time. I have purchased some import bits and found them to be close, but not to exact size; these MLCS bits are a true 1/4, 3/8, and 1/2 inch. And they match the brass setup blocks for a perfect fit every time ... see me smile.