Prolube 44847 Συσκευασία ρουλεμάν τύπου πάγκου ταχείας δράσης

Brand:PROLUBE

3.2/5

101.39

GROZ PROLUBE 44847 Deluxe Steel Bearing Packer. Ανθεκτική κατασκευή από χάλυβα ιδανική για λίπανση ρουλεμάν σε αυτοκίνητα, σκάφη, τρακτέρ και RV. Κορυφαίος κώνος χωρίς σπείρωμα για γρήγορη και εύκολη τοποθέτηση των ρουλεμάν. Η σχεδίαση ενσωματώνει γρασαδόρους στον εξωτερικό άξονα που προσαρμόζεται στον σύνδεσμο γρασαδόρου. Κατάλληλο για ρουλεμάν με ελάχιστο αναγνωριστικό από 1/2 ίντσα έως μέγιστο 6 ίντσες και ύψος από 3/8 ίντσες ή 2 ίντσες. ΧΡΗΣΙΜΕΣ ΣΥΜΒΟΥΛΕΣ: Χρησιμοποιείτε πάντα τη συνιστώμενη ποιότητα γράσου. Ορισμένες ποιότητες γράσου δεν μπορούν να χειριστούν τις θερμοκρασίες των εφαρμογών ρουλεμάν τροχών. Μην χρησιμοποιείτε πεπιεσμένο αέρα για τον καθαρισμό του ρουλεμάν πριν από τη χρήση με ρουλεμάν συσκευασίας.

Κατάλληλο για ρουλεμάν με ελ. ID από 1/2 έως max 6 και ύψος από 3/8 έως 2. Κώνος κορυφής χωρίς σπείρωμα για γρήγορη τοποθέτηση ρουλεμάν. Για χρήση ειδικά με Grease Guns. Η ανθεκτική κατασκευή από χάλυβα το καθιστά ιδανικό για λίπανση ρουλεμάν σε αυτοκίνητα, σκάφη, τρακτέρ και RV.
Bearing Number 44847
Brand PROLUBE
Compatible Lubricant Grease
Item model number BEP/625
Item Weight 0.01 Ounces
Manufacturer Groz
Material Steel
Package Dimensions 8.74 x 7.72 x 6.73 inches; 0.01 Ounces

3.2

8 Review
5 Star
59
4 Star
19
3 Star
7
2 Star
4
1 Star
11

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Steven Marsh
Good product
It works well
Scritto da: Brad
You still get greasy!
I've hand packed most all of my wheel bearings my mechanic life (since 1987), so I'm very old school. I wanted to try this unit to see if it would be any easier.... I don't regret purchasing this unit. It's fun to use, but I've ended up just hand packing for piece of mind. It uses a ton of extra grease just to get where it will pack a bearing, grease that could have been used to pack a few bearings. It does have a nice dust cover and does a better job than the manual packers I've used. But since I use expensive sythetic grease it's just not worth the price of losing all that grease that could be utilized!
Scritto da: Big Tone
Grease lightning, life made easy
As a mechanic with 30+ years experience its the little things that make life easier. I bought this for my garage at home because we were putting new bearings in all our trailers. I already have experience greasing bearings using the hand method so I know the mess. So I didn't take it out until the boys did at least one the old way and then saw me take this tool out. The look on their faces was worth it. Anyway, it is well constructed and works perfect, I have previously owned the plastic version of this which had mysteriously disappeared at the last shop I worked at. I clamp it into my vice on my tool box and set up a stainless tray to lay out all the bearings on. Cleans up easy as well !!
Scritto da: Rose Whitehorn
Great
This is a lot better than the tub ! I love it ! Made job so much easer !1
Scritto da: sterling Denton
Doesn’t seal bearing
Upon first use I notice the base was slightly bend down. Upon putting grease in the tool it pushed most the grease on outside of bearing instead of up right threw the center
Scritto da: Ned ford
Not worth it
Does not work at all, waste of money. Lid never stays on, it’s a bigger mess then the push style
Scritto da: BigDAdventures
Nope
It doesn’t hold the bearing down tight enough to work properly. Only wastes grease
Scritto da: Jim
Very satisfied!
Works great on my dana 70 (1975 F-350 dually bearings)

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array