Klein Tools 32791 Pro Impact Driver Bit Extension 1/4-Inch Hex

Brand:Klein Tools

3.8/5

29.14

Μπορεί να βρεθεί μαζί με άλλα μεγέθη και συμβουλές στο Pro Impact Power Bit Set (Αρ. Κατ. 32799). Περιλαμβάνει προέκταση bit ισχύος 1, 4 ιντσών (101,6 mm). Τυπικό εξάγωνο στέλεχος 1/4 ίντσας (6,4 mm). Η επέκταση 4 ιντσών (101,6 mm) φτάνει εύκολα σε κουτιά 3-3/8 ιντσών. Χάλυβας S2 Impact-Rated για μέγιστη διάρκεια ζωής. Ο ισχυρός μαγνήτης κρατά τα κομμάτια στη θέση τους. Μεγαλύτερα bits ισχύος επαγγελματικού κρούσης έχουν σχεδιαστεί για να φτάνουν εύκολα σε κουτιά και πάνελ.

Μπορεί να βρεθεί μαζί με άλλα μεγέθη και συμβουλές στο Pro Impact Power Bit Set (Αρ. Κατ. 32799). Περιλαμβάνει προέκταση bit ισχύος 1, 4 ιντσών (101,6 mm). Τυπικό εξάγωνο στέλεχος 1/4 ίντσας (6,4 mm). Η επέκταση 4 ιντσών (101,6 mm) φτάνει εύκολα σε κουτιά 3-3/8 ιντσών. Χάλυβας S2 Impact-Rated για μέγιστη διάρκεια ζωής. Ο ισχυρός μαγνήτης κρατά τα κομμάτια στη θέση τους. Μεγαλύτερα bits ισχύος επαγγελματικού κρούσης έχουν σχεδιαστεί για να φτάνουν εύκολα σε κουτιά και πάνελ.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Klein Tools
Brand ‎Klein Tools
Color ‎Multi
Compatible Fastener Range ‎0.25 inches
Customer Reviews 4.7 4.7 out of 5 stars 100 ratings 4.7 out of 5 stars
Drive System External Hex
Drive System ‎External Hex
Finish ‎Painted
Finish Type ‎Painted
Handle Material ‎Alloy Steel
Included Components ‎Tools & Accessories
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Length ‎1 inches
Item model number ‎32791
Item Package Quantity ‎1
Item Weight ‎0.8 ounces
Manufacturer ‎Klein Tools
Material S2 Steel
Material ‎S2 Steel
Number Of Pieces ‎1
Part Number ‎32791
Product Dimensions ‎1 x 1 x 1 inches
Size 1/4-Inch
Size ‎1/4-Inch
Special Features ‎Strong Magnetic Hold
Usage ‎Professional
Warranty Description ‎1 Year Manufacturer

3.8

8 Review
5 Star
83
4 Star
11
3 Star
3
2 Star
0
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Eli
Great, just one small weakness
This is great because it’s 4” so long enough to reach a few spaces like when you need to screw inside electrical boxes, but not too long like the 6” where you sacrifice control if you’re not used to it. Only weakness is that tip sometimes stays on whatever you were screwing because magnet doesn’t hold it all The way,
Scritto da: JoJo
Honestly impressive!
I'm not really one to leave reviews on here but I really enjoy using This tool. It's a just a hex extension but I find that magnet is just the right strength for My projects and for switching out the bits that I need to exchange are done with one hand. This tool is also impact ready and I am using a Mikita Impact driver. I bought another set that said was impact ready and I tore up the head literally from the hex driver end. They lasted about 3 minutes. BUT This extension has lasted about 3 intense jobs so far. There is only a little discoloration around the part that goes into the makita.
Scritto da: RG
don’t buy it the bits keep it loosing every time when you screw something
every time that you put screws on the something the bit come out from it. i wouldn’t buy it again and not even recommended to anybody
Scritto da: amznuser
Would not fit my impact driver
Tolerances are off on the shank and it would not fit into my impact driver. All my other bits fit fine.
Scritto da: Michael Seymour
Strips easily, not recommended.
Extremely disappointing product from an otherwise reputable manufacturer. Perhaps I received a faulty part, though as seen in the photo, the top section of the driver has completely stripped from driving approximately 30 hex head screws.
Scritto da: Wirenut
It's a Klein tool!
I like Klein tools because they are well made and durable.
Scritto da: Harold T. Read
There's NO stupid C-Clip
Good, magnetic driver bits have been available for many years, but now everybody thinks that they have to have a C-Clip, to hold the bit in. I recently bought a pack of a very popular brand, and I could barely get the driver bits out of the holder, because of the ridiculous C-Clip. The clip was gouging the bits, badly. I used a tiny screwdriver to remove the clips, and all was good. So, I bought these Klein Tools magnetic holders -- because they do NOT have the ridiculous C-Clips. The magnet is all I need to retain the driver bits, and Klein's quality is what you would expect from them.
Scritto da: Karen Cuevas Guerrero
Ok
Funciona y es de buena calidad

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array