Keeper – 2” x 24” Premium ιμάντας πρόσδεσης άξονα με δακτυλίους D - 3.333 λίβρες. Όριο φόρτου εργασίας και 10.000 λίβρες. Δύναμη θραύσης

Brand:KEEPER

3.8/5

30.53

Ιδανική χρήση: Ιδανική για τη στερέωση φορτίου και εξοπλισμού στο όχημά σας με βάρος 3.333 λίβρες. όριο φορτίου εργασίας. Τρόπος χρήσης: Για να κολλήσετε, τυλίξτε τον ιμάντα γύρω από ένα σημείο αγκύρωσης, όπως έναν άξονα οχήματος. Χαρακτηριστικά ασφάλισης: Κατασκευασμένο με σφραγισμένους δακτυλίους από χάλυβα και χρησιμοποιείται ως σημείο αγκύρωσης για το δέσιμο της καστάνιας για μεγιστοποίηση της έντασης και της ασφάλειας για τις ανάγκες μεταφοράς. Ποιότητα και ανθεκτικότητα: Keeper 24 ιντσών. Ο κορυφαίος ιμάντας πρόσδεσης άξονα διαθέτει πλέγμα 2 ιντσών ανθεκτικό στην τριβή και τη σήψη. Hi-Test πλέγμα για απορρόφηση κραδασμών κατά τη μεταφορά. Το Όριο Φορτίου Εργασίας (WLL) είναι το μέγιστο βάρος φορτίου που μπορεί να χειριστεί και να δεχτεί με ασφάλεια δυνάμεις που προκαλούνται από την ταχύτητα, τις συνθήκες του δρόμου ή τις καταστάσεις έκτακτης ανάγκης. Το βιομηχανικό πρότυπο για το WLL είναι το 1/3 της αντοχής θραύσης.

Ιδανική χρήση: Ιδανική για τη στερέωση φορτίου και εξοπλισμού στο όχημά σας με βάρος 3.333 λίβρες. όριο φορτίου εργασίας. Τρόπος χρήσης: Για να κολλήσετε, τυλίξτε τον ιμάντα γύρω από ένα σημείο αγκύρωσης, όπως έναν άξονα οχήματος. Χαρακτηριστικά ασφάλισης: Κατασκευασμένο με σφραγισμένους δακτυλίους από χάλυβα και χρησιμοποιείται ως σημείο αγκύρωσης για το δέσιμο της καστάνιας για μεγιστοποίηση της έντασης και της ασφάλειας για τις ανάγκες μεταφοράς. Ποιότητα και ανθεκτικότητα: Keeper 24 ιντσών. Ο κορυφαίος ιμάντας πρόσδεσης άξονα διαθέτει πλέγμα 2 ιντσών ανθεκτικό στην τριβή και τη σήψη. Hi-Test πλέγμα για απορρόφηση κραδασμών κατά τη μεταφορά. Το Όριο Φορτίου Εργασίας (WLL) είναι το μέγιστο βάρος φορτίου που μπορεί να χειριστεί και να δεχτεί με ασφάλεια δυνάμεις που προκαλούνται από την ταχύτητα, τις συνθήκες του δρόμου ή τις καταστάσεις έκτακτης ανάγκης. Το βιομηχανικό πρότυπο για το WLL είναι το 1/3 της αντοχής θραύσης.
Brand KEEPER
Color One Color
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 4226
Load Capacity 10000 pound
Manufacturer Keeper
Material Alloy Steel
Product Dimensions 12 x 7 x 4 inches; 8 Ounces
Size 24 Inch x 2 Inch

3.8

13 Review
5 Star
84
4 Star
12
3 Star
3
2 Star
1
1 Star
1

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Vinny B
One of the best
Ironically I should have bought two but it was a idea of the job and a great product
Scritto da: sujamel
Good strap
Very nice lifting strap.
Scritto da: Mark H
Multiple uses
This was purchased with two carabiners to replace a breaking strap on my mother-in-law’s Rollater walker. The strap is used to collapse it when lifted by the strap. This will never have to be replaced again and will outlive the rollater.
Scritto da: Typoagain
Wish I had bought longer.
It came in and I immediately put it to use yesterday. It seems to be well made and it did an excellent job. My only complaint is I wish I had bought one that was longer. I just didn't think I needed a longer one. I was wrong. I really needed a 36 inch. My bad.
Scritto da: Kelsey Ruth
Used to create car seat anchors
We went on a 14 hr road trip in our Chevy Express passenger van with 2 young kids in car seats. For this trip, we only used the middle bench seat (there are 3 total). However, only the front bench seat has anchor points for car seat latches. I didnt want to only use the seat belts to hold the car seats in place since it was such a long trip. I purchased 2 of these straps, one for each car seat. I secured the strap around the frame of the bench seat so that each end of the strap came up through the seat where anchors would normally be. Both of our carseats are the Graco Contender 65. The latch hooks did fit on the D rings on these straps, just had to angle it a little to get it to fully close. But it was easy to connect and disconnect.
Scritto da: Mr Romo
Very well made
These are insanely strong with zero flex hauling 1800lbs.
Scritto da: Luis rivera
Fuerte
Levante de peso
Scritto da: Rick M.
Strong, durable well woven and the sleeve protects it from being cut! 5*****
For the price or even double the price, this thing is amazing and has the sleeve that protects it from getting cut, I used the 2 ft one for my punching bag and the 3 ft I leave in my truck and actually used the day after I got it because I got it before the bad snow storm a month or two ago! This brand is a very high quality and would strongly recommend purchasing... Helpful votes help you and me a like!
Scritto da: Amogha
Very strong and good material
The material is very good and strong
Scritto da: RC
Good strap
I would recommend
Scritto da: Yanick
Unbeatable price/quality ratio
It just works there is nothing to add...
Scritto da: Shayne Peterson
The right tool for the job.
It's nice to use the proper tool for the job. We would previously tie down race cars using a j-hook on whatever solid piece of the subframe we could find. This would compress the suspension and bumps would cause the straps to get looser and tighter. Not ideal. Now, depending on the car, we either lace the axle strap around the axle or through the wheels and tie the car down by unsprung components which means less wear and tear on the car, a smoother ride of the trailer and a more secure strap system.
Scritto da: Rheal lacroix
????
????

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array