Cannon 1903002 Περιστρεφόμενη βάση στήριξης χαμηλού προφίλ, από ανοξείδωτο χάλυβα

Name: Cannon 1903002 Περιστρεφόμενη βάση στήριξης χαμηλού προφίλ, από ανοξείδωτο χάλυβα
Brand: ‎Cannon
SKU: 0031113257524
Price: 241.79 EUR
Availability: InStock

Brand:‎Cannon

3.6/5

€
241.79

Τα συστήματα στερέωσης Cannon βοηθούν στην εξάρτηση του συστήματος προς όφελός σας. Η περιστρεφόμενη βάση χαμηλού προφίλ Cannon έχει 16 σημεία ασφάλισης που επιτρέπουν 360° περιστροφή προς τα κάτω με θέσεις κλειδώματος κάθε 22,5°. Τα σύνθετα εξαρτήματα και η κατασκευή από ανοξείδωτο χάλυβα κάνουν το τυπικό μοντέλο τόσο δυνατό όσο και ευέλικτο. Διατίθεται επίσης σε μοντέλο από ανοξείδωτο χάλυβα 316 για πρόσθετη αντοχή και αντοχή στη διάβρωση.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0031113257524

Κατηγορίες Αθλητισμός & Υπαίθριες δραστηριότητες, Κυνήγι & Ψάρεμα, Fishing, Κατεβατά,

Περιλαμβάνει υλικό τοποθέτησης. Ανοξείδωτο ατσάλι 316. Περιλαμβάνει βάση και υλικό. Το ψάρεμα είναι το πάθος μας και είναι βαθύ. Στην Cannon, η αγάπη μας για το ψάρεμα συνδυάζεται μόνο με το πάθος μας να κατασκευάζουμε ασταμάτητες σκάλες, βάσεις για καλάμια, σύστημα στερέωσης και όλο τον εξοπλισμό που χρειάζεστε για να βάλετε περισσότερα ψάρια στο κατάστρωμα. Ο σχεδιασμός χαμηλού προφίλ μεγιστοποιεί τον διαθέσιμο χώρο. Προ-τρυπημένο και χτυπημένο για εύκολη εγκατάσταση. Στοιχεία και κατασκευή από ανοξείδωτο χάλυβα 316 για πρόσθετη αντοχή και αντοχή στη διάβρωση. Περιστρεφόμενη βάση 16 σημείων 360° που κλειδώνει κάθε 22, 5° για περιστροφή 360 μοιρών προς τα κάτω.

Brand Name	‎Cannon
Color	‎Not Available
Customer Reviews	4.5 4.5 out of 5 stars 49 ratings 4.5 out of 5 stars
Fishing Technique	‎All
Included Components	‎Swivel Base; Mounting Hardware
Item Dimensions LxWxH	‎8 x 7 x 2 inches
Item Package Dimensions L x W x H	‎7.8 x 6.1 x 2 inches
Item Weight	‎4.8 Pounds
Manufacturer	‎Spectre
Material	‎Plastic
Model Name	‎Low Profile Swivel
Model Year	‎2009
Number of Items	‎1
Package Weight	‎4.8 Pounds
Part Number	‎1903002
Size	‎Not Available
Sport Type	‎Boating, Fishing
Style	‎Low-profile Swivel
Suggested Users	‎Unisex-adult
Warranty Description	‎1-Year Limited

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Doug

cannon ss downrigger swivel base

I would have given it five stars but the tolerances were too loose in the swivel. The downrigger/potpuller has a little "rock" to it. If it had a bit more machined off the inside of the base or the plastic 'washer' was a bit thicker this would be a five. It would be a bonus if it had a Scotty bolt pattern as well as the cannon. I fabricated an aluminum adaptor and it works very well. Other than the above it is the best downrigger mount out there. Very well built and a fine finish on the 316 stainless. I am going to get another and toss the Scotty swivel I have. Another good feature is the replaceable plastic washer so the swivel is smooth and will last forever. Replace a worn out Scotty once and you have more than covered the cost. You will never have to buy another! So seldom do you see good quality these days this is refreshing.

Scritto da: Julie S.

Sturdy

New set up for my cannon mag 5"S,went together fine all the holes lined up and no cross threading,Game changer.No more leaning over the boat to retrieve lines or weights in choppy water. The set up is not cheap but if it makes fishing easier and safer why not.After reading reviews about the Lexan bases cracking in a couple of years and decided not to ever buy these again so I went for the SS model, I think this set up will out last me and the down riggers.Tight lines.

Scritto da: Justin anderson

Great product!!

Well built,high quality, a little bit pricey but no regrets.

Scritto da: Greg 92625

Marginal product.... terrible support!

Used product in combination with the SS Gimbal mount. Had a very bad experience with the product so I sent the following Email to their service... Help! The SS swivel bases that I purchased have been a huge challenge to work with in combination with the gimble mount. Do you have any way of tightening the swivel bases? The ones that came with the product are plastic and are much tighter. Additionally, I had chosen the gimble mount because I was concerned that there was no thickness to my gunwhale (28 Regulator CC). I'm going to have to switch to a plate mount because both the gimble mount and the swivel base are extremely loose. They have popped out of place several times and done significant damage to gel coat and I'll need some fiberglass touch up as well Is there an attractive SS plate option with a backing plate? This was their response....Hello, The SS bases you purchased are the only SS swivel bases we sell. Thank You Brian

Scritto da: Happy sailor

Rotates 360°

Very heavily built

Scritto da: DRM

Replacement for Composite Version

I purchased two of these to replace the composite low profile swivel mounts which developed cracks in the bases in 1-2 years of use. These are much sturdier and should outlast the downriggers and boat. My only complaint is there is more play in the swivel action compared to the composite version.

Scritto da: Steve McCammon

They are not like the plastic,they are stainless steel and are the real thing.

Like every thing about them.

Scritto da: GF

Lifetime product stainless

Great product for the 2 cannon down riggers tha I have on a 30 foot boat

Scritto da: John Joly

Perfect Mount for Prawn Line Hauler

I adapted this Cannon stainless swivel mount to accept my prawn line hauler. I am very pleased with the strength of the mound when the line hauler is pulling approximately 200 pounds of traps from about 300 feet of water. It has proven to be a perfect solution because it allows me to swivel the hauler tp pick up my traps when they are at the surface. I would recommend the stainless swivel for this application and I am very pleased to have made this choice for my prawn fishing activities.