BOSCH ITBH601 1-Pece 6 In. Σκληρή μαγνητική βάση κρούσης 6 ιντσών. Standard 1-Pece

Brand:BOSCH

3.6/5

32.57

Το σκληρό μύτη οδήγησης BOSCH διαθέτει εκτεταμένη ζώνη στρέψης και έχει αναβαθμιστεί ώστε να προσφέρει 10x διάρκεια ζωής σε ένα μιτ BOSCH Standard. Αυτό το μύτη με ονομαστική κρούση απορροφά τις κορυφές ροπής για να μειώσει την πίεση στο συνδετήρα. Η άκρη της μύτης είναι σχεδιασμένη και επεξεργασμένη με ακρίβεια για καλύτερη ενσωματωμένη εφαρμογή και μειωμένη έξοδο CAM. Αυτά τα σκληρά εξαρτήματα πρόσκρουσης είναι μια σειρά από μύτες βιδώματος, μύτες διπλού άκρου, ρυθμιστές παξιμαδιών, υποδοχές και υποδοχές μύτης με βαθμολογία κρούσης που έχουν βελτιωθεί για να χειρίζονται μια νέα γενιά μηχανισμών κίνησης πρόσκρουσης υψηλότερης ροπής. Διαθέτει σημάδια χαραγμένα με λέιζερ που είναι ευανάγνωστα και δεν τρίβονται με επαναλαμβανόμενη χρήση.

Διεπαφή Hex – κατασκευασμένη για να χωράει 1/4 in. Προγράμματα οδήγησης Hex Impact. Κατασκευή με θερμική επεξεργασία – παρέχει αυξημένη αντοχή. Προηγμένη σχεδίαση – παρέχει ασφαλή εφαρμογή. Εκτεταμένη ζώνη στρέψης – βοηθά στην απορρόφηση των κορυφών της ροπής των οδηγών κρούσης για την αποφυγή θραύσης. Σχεδίαση σκληρής κρούσης – παρέχει 10x διάρκεια ζωής σε σχέση με τα τυπικά κομμάτια, με εκτεταμένη ζώνη στρέψης, σκληρυμένο πυρήνα και μύτη ακριβείας.
Batteries Included? ‎No
Batteries Required? ‎No
Brand BOSCH
Brand ‎BOSCH
Compatible Fastener Range ‎0.25 inches
Customer Reviews 4.6 4.6 out of 5 stars 13,162 ratings 4.6 out of 5 stars
Drive System Hex
Drive System ‎Hex
Finish ‎Painted
Finish Type Painted
Finish Type ‎Painted
Included Components
Item model number ‎ITBH601
Item Package Quantity ‎1
Item Weight ‎0.96 ounces
Manufacturer ‎Bosch
Material Alloy Steel
Material ‎Alloy Steel
Number Of Pieces ‎1
Package Dimensions ‎8.86 x 1.73 x 0.55 inches
Part Number ‎ITBH601
Size 6 In.
Size ‎6 In.
Style ‎Standard

3.6

13 Review
5 Star
76
4 Star
14
3 Star
5
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Eri
It is only one.
They used to have 5 for the price I believe. It's only one piece. Don't be tricked by the picture of 5 pieces. That's an old scammers trick that I fell for. Not too expensive for 1 piece though. But honestly and I repeat honestly, It sounds like a good deal but is not! I wish the seller was honest. Obviously not
Scritto da: Jason
Misleading product photo
While this bit driver was what I was looking for, the photo shows 5 drivers. I admit it's my own fault for not reading the description saying 1 piece, but based off the photos I thought I was getting a heck of a deal. However for anyone who is tired of their bit pulling out of the driver everytime they screw in a screw this is perfect. The bit locks in just like the driver locks in to an impact drill.
Scritto da: Andy
Perfect quick disconnect addapter for my standard drill chucks!
Perfect for when I'm using my hex drive bits in my 3/8" drill chuck! Compact and fits in the standard hex bit holder. Perfect solution to make your drill chuck easy to use with your hex bits and not have to tighten and loosen it to constantly change bits. Hex-drive drill-bit or socket-driver changes are fast and effortless too. No more chuck-key or round shank drill bits to mess with or waist time when quick changes are needed. Holds them securely. Just pop 'em in and out, perfect!
Scritto da: John Haley
picture shows 5, get 1 deceiving!
Good product, received less than what picture shows. Felt deceived. My fault should have read and understood discription better.
Scritto da: Michael Ringer
it holds your bits!
This is so much better than the bit holders I used to use. This not only is magnetic but it also grips the bit so it won't fall out. So much better than the old school bit holders that are just magnetic.
Scritto da: Angela arnold
Good enough product
It was good for a week, but then the holder quit releasing the bits. I do a lot of construction and have been having issues finding a good quality one.
Scritto da: PaulW
Easy to use, holds bits tight.
I needed to be able to hold small bits in my impact driver. This works great, it holds the bits very securely. It's a good quality tool.
Scritto da: beka dogonadze
good
good
Scritto da: Joiner/Carpenter
5 Pack ordered and 4 bent or badly assembled
4 out 5 of these holders were unusable, rotating out of alignment,. Surprised at Bosch for this. Other buyers with same problem. Returned
Scritto da: A. Parker
Great item and does what it’s supposed to do
Firstly this is what it is. It’s a bit pricey but good quality and would pay the same again quiet happily. Very happy with it.
Scritto da: Alex
Much better than magnetic part it replaced.
Great product.
Scritto da: Fioori
Não recomendo!
Em si o material aparenta ser bom fisicamente, porém vc logo vê que o ímã que é o principal requisito pra o produto, é muito fraquinho deixando até parafusos pequenos caírem, e a broca escolhida após encaixada 70% das vezes vc tem que remover com alicate pois fica preso, durabilidade muito boa pq vc quase não vai usar por isso dura bem. Não recomendo!
Scritto da: Jeremy Porter
Will not release the bit without using plyers
This seems like a simple and useful bit holder. However, when I want to take the bit out of this, it will not allow me to slide the release sleeve up to do so. I have to use plyers to pry on it. I'm not sure why it works this way. Perhaps I received a dud. I have another brand one and it releases the same bit without issue. So I would not recommend this one. Updating after some more use and it's just gotten worse. I have to pry the release open now with my vise. So there is nothing quick about this quick release. I've stopped using it as it's just garbage.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array