DEWALT Bit Holder, 3-in-1, Impact Ready (DWA3HLDFT)

Name: DEWALT Bit Holder, 3-in-1, Impact Ready (DWA3HLDFT)
Brand: DEWALT
SKU: 0885911567923
Price: 31.01 EUR
Availability: InStock

Brand:DEWALT

3.6/5

€
31.01

Οι θήκες κλειδώματος DEWALT IMPACT READY παρέχουν στους χρήστες ό,τι ακριβώς χρειάζονται όταν στερεώνουν ή τρυπούν με εξαρτήματα εξαγωνικού στελέχους. Ο μηχανισμός ασφάλισης κρατά με ασφάλεια το αξεσουάρ στη θέση του κατά τη χρήση και οι λειτουργίες γρήγορης αλλαγής διευκολύνουν την αλλαγή αξεσουάρ κατά την εργασία. Ο ισχυρός μαγνητισμός παρέχει βέλτιστη συγκράτηση των συνδετήρων για εφαρμογές βιδωτής κίνησης και ο ανθεκτικός, μοναδικά σχεδιασμένος μηχανισμός ασφάλισης επιτρέπει στους χρήστες όχι μόνο να οδηγούν με 1 μύτες κίνησης βιδών, αλλά να αποδέχονται όλα τα αξεσουάρ εξαγωνικού στελέχους. κάνοντας αυτές τις βάσεις να δέχονται 2 μπιτ και περισσότερο, καθώς και τρυπάνια με εξάγωνο στέλεχος. Το λεπτό προφίλ επιτρέπει στους χρήστες να ολοκληρώνουν περισσότερες εφαρμογές από πιο ογκώδη, ανταγωνιστικά σχέδια, όπως βίδες βύθισης σε βραχίονες ή κατά την εγκατάσταση συνδετήρων σε κοντινή απόσταση.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0885911567923

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Κρατητήρες μπιτ,

Λεπτό προφίλ 11mm για στερέωση και διάτρηση σε στενούς χώρους. Δέχεται 1 μύτες βιδώματος και όλα τα εξαρτήματα 1/4 εξαγωνικού στελέχους για διάτρηση και οδήγηση. Μαγνητισμός για συγκράτηση συνδετήρων. Μηχανισμός κλειδώματος για συγκράτηση εξαρτημάτων.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	DEWALT
Brand	‎DEWALT
Color	‎Multi
Compatible Fastener Range	‎0.25 inches
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 1,094 ratings 4.5 out of 5 stars
Drive System	Hex
Drive System	‎Hex
Finish	‎Painted
Finish Type	‎Painted
Included Components	‎1-Holder
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	5.8 x 9.3 x 0.6 inches
Item Dimensions LxWxH	‎5.8 x 9.3 x 0.6 inches
Item Length	‎5.8 inches
Item model number	‎DWA3HLDFT
Item Package Quantity	‎1
Item Weight	‎1.12 ounces
Manufacturer	‎DEWALT
Material	Blend
Material	‎Blend
Number Of Pieces	‎1
Part Number	‎DWA3HLDFT
Power Source	‎Battery Powered
Product Dimensions	‎5.8 x 9.3 x 0.6 inches
Size	One Size
Size	‎One Size
Style	‎Impact Ready 3-in-1 Bit Holder

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: David Grunwell

In cryptic International Iconography, it kind of tells you how to release a bit. I will tell you.

TLDR: Pull down on the black section just below the chrome section to release your bits. It is the section that is same diameter as the top. A TINY gray on black stealth arrow is there. See my photo. I want to give it a one star for easy to use as other will have my same problem. Once you understand how to release the bits, it is decent. It may have had all 5 stars but for the instructions. I wanted a quick-release bit holder that would hold tight to my bits and not stay with the project/screw head, ect. I spent hours researching the best bit holder. Yes, I am that kind of guy. This one got great reviews. Putting the bit in was easy. Releasing it was not. It held on even with a vice and plyers. Pulling, twisting, swearing, jerking it back and forth, all no. There are NO instructions on how to release the bits. Not even online. I looked at the tiny packaging and it has that cryptic international set of icons of a lock and unlocked lock. DEWALT marketing put DEWALT TM yellow behind the whole bit holder and that yellow circles out to encompass the unlock icon, making it seem as if you pull or push down on the whole bit holder to release it. No. The back of the package has 3pt type, worthy of a medicine bottle, full of CYA 'wear safety goggles', where it is made, all in three different languages, NOTHING about releasing your bit. (Insert swearing here.) Setting up an Amazon return, I am frustrated that online people are saying to remove a wire locking ring that DEWALT put in it BEFORE using it (different holder). I am frustrated that I have lost a bit and time sending it back to the seller. I spend more online research looking for a different holder. One video shows a different holder with a pull down release ring. WHAT? I hate giving up, and this thing has my bit! With a magnifying glass, I realize that the black section, just below and the size of the chrome upper section, has a 5/16" tiny gray (on black) down arrow only on ONE SIDE. I pull down and it barely moves. I pull more and it finally gives me back my bit. As I must like punishment, I put the bit back in and keep working the black section to where it gives me back my bit with less cussing. To DEWALT management: Free User Experience advice from a UX designer. Once people know about this feature, it becomes second nature. Simple and easy to use. FIRST, they have to know it is there or you get furious users who think your product sucks. I get it, this is a $10 gadget, so making a video or giving your cardboard a one inch bigger strip to explain how to use it seems foolish. "Everybody (here) knows how to use one!" To new users, you are building flawed tools and giving them hours of frustration, plus getting returns and negative word-of-mouth advertising. STOP the 'cool' gray printing on black. In low light, or without a magnifier, we just cannot see it!

Scritto da: FloodRunner

It's okay

I'll admit, I had doubts about this tool's ability to retain a fastener and they proved somewhat accurate. It does a good job retaining bits by magnetism and a locking mech that could work a little more smoothly. I wish it was a little shorter for access to tighter spaces but that really depends on the situation. The "short" story on this is you have to use really short bits so the fastener is relatively close to the tool's magnet or it isn't retained. Its ability to retain a longer fastener in the bit, like a 3 1/2" screw, is dubious at best. It would also be nice if the outer sheath rotated freely so it could be used to steady the aim with your free hand while the fastener is being driven but that might not be possible due to its mechanical locking feature. Its limitations are just that, limitations, when a few design improvements would broaden its usefulness and applicability. For true, solid magnetic retention of fasteners it's best to use the sliding magnetic collar design. DeWalt's metal magnetic collar seems to be the most solid and durable of these since other manufacture's offerings are cheap plastic with questionable durability. These collars require special "necked down" bits to work so setting up for all the different drives these days (SQ1&2, T25, T30, PH2 &3) gets kind of pricey. I'd hoped this would be a more economical alternative to that, and it is when using shorter screws in a situation its length allows.

Scritto da: Chad

Not the short bit holder you wanted.

I hope this helps someone because no one seemed to show photos. Even though it's just a half inch it's the difference at how well I can drive screws more accurately I'm trying to find this Milwaukee to buy again because it's the shortest I've seen. The DeWalt has to be out of the drill farther for the quick release to work. That's why the photos might look biased but there not. I wish they represented how far the holder with bit comes out to. Hope this helps at least one person.

Scritto da: DAVYM

Best bit holder to date.

The release mechanism on the bottom instead of the top where the bit is, definitely last longer and I have noticed it's less prone to getting in the way. If you know what I mean thumbs up ;) Thank again DeWalt.

Scritto da: Aldo Ahuatzi

Easy to use but will need multiple

I like the design and easy to use switch ability with the but holder but my only gripe is the durability. For regular use with an impact nothing seems out of normal but when you use it to drive long screws for a while the little latch at the base of the bit holder breaks off and now you can’t swap bits so your stuck with whatever bit you got on but it still works and magnetized so I’m not too mad. Just gotta get a couple depending on what you do

Scritto da: scottysize

Why Did I Not Know This Existed?

For years I've been grabbing the bit as it falls out after removing or inserting the screw and placing it back in the magnetic holder for the next screw. For YEARS. I have always hated magnetic holders, but they're better than nothing, right? No longer. This thing is awesome. It grabs the bit and will not let go until you slide the collar down. So, two options: 1, leave a little room between the collar and the chuck so that you can slide the collar down and switch out bits. 2: Remove the entire assembly from the chuck, and then swap out bits. Either works fine. I like to leave a little room so I can swap bits on the fly. It means you have to tighten the chuck as tight as you can, but think about it this way. You never had to remove the assembly once it's in place (unless you need to put in a drill bit), so tighten away. I only wish I had a chuck with a key so I could get it good and tight. Great product.

Scritto da: Adrian Anghelina

Fine tool from dewalt

Well built

Scritto da: Rol

Buen portapuntas aunque algo estorboso

Es un buen portapuntas, tiene buen imán, además de que trae un seguro para que las puntas no se salgan. considero que es un poco estorboso para aplicaciones en espacios reducidos. De ahí en fuera, funciona muy bien, mejora el agarre de la punta en el tornillo y previene barrer la cabeza de los tornillos.

Scritto da: Joedson da Silva Souza Loureiro

Produto de alta qualidade ! Recomendo.

The media could not be loaded. *Gostei do produto pelo fato de que ele tem trava de segurança para o bit, diferente daqueles outros que só tem imã que fica soltando toda hora, e fazendo o usuário ficar louco de raiv@???????? * 100%reto no intuito de quando coloca na parafusadeira junto com o bit não fica tremendo a parafusadeira.

Scritto da: Mal McAuliffe

Best ever

Literally the best bit holder I've ever used. Expensive but good. I bought another spare for me and one for my daughter

Scritto da: Vinicius Batista Borges

O melhor para segurar os BIT em parafusadeiras abaixo de 11Dolares

Eu já tinha testado vários (desde milwaukee, bosh, diablo,wiha, etc) mas esse me surpreendeu, mesmo depois de uma queda, ainda contínua funcionando perfeitamente.