Απλό καλώδιο καλωδίων Concealer στον τοίχο Καλύμματα καλωδίων 6, 25" - Σύστημα διαχείρισης καλωδίων 150" Κρύβει καλώδια, καλώδια για επιτοίχιες τηλεοράσεις, υπολογιστές - Λευκά λευκά καλύμματα καλωδίων 150

Brand:SimpleCord

3.5/5

€
48.60

ΛΕΠΤΟΜΕΡΕΙΕΣ ΠΡΟΪΟΝΤΟΣ – Το σετ Περιλαμβάνει: 6 αυλάκια καλωδίων (25” το καθένα), 5 ίσιες συνδέσεις, 4 αγκώνες σύνδεσης, 1 σύνδεσμος εσωτερικού αγκώνα, 1 σύνδεσμος εξωτερικού αγκώνα και 1 σύνδεσμος T, 6 τεμάχια κολλητική ταινία, 12 βίδες, 12 άγκυρες τοίχου . ΑΣΦΑΛΗΣ ΠΡΟΣΤΑΤΕΥΤΙΚΟ ΚΑΛΩΔΙΟΥ – Προστατέψτε τα παιδιά σας από καλώδια και κορδόνια που κρέμονται κοντά στο πάτωμα. Η απλή εγκατάσταση θα σας επιτρέψει να κρύψετε με ασφάλεια τα καλώδια γύρω από την τηλεόραση, το γραφείο ή το σανίδι βάσης. ΠΡΟΣΑΡΜΟΖΕΤΑΙ ΣΕ ΟΠΟΙΑΔΗΠΟΤΕ ΔΙΑΚΟΣΜΗΣΗ – Το κιτ κονσίλερ κορδονιών μας συνδυάζεται με οποιαδήποτε διακόσμηση και τα καλύμματα Γλιστρούν ΕΥΚΟΛΑ από τις πίστες. Μπορείτε να βάψετε τα καλύμματα καλωδίων ώστε να ταιριάζουν με το χρώμα του τοίχου σας και τα καλύμματα να κοπούν στο επιθυμητό μήκος. ΑΥΤΟΚΟΛΛΗΤΗ ΤΑΙΝΙΑ – Κάθε κιτ έχει ισχυρή αυτοκόλλητη ταινία και εύκολο να ακολουθήσει τις οδηγίες. Μπορείτε να επιλέξετε να χρησιμοποιήσετε την ταινία φλοιού και κολλήματος ή τις αγκυρώσεις γυψοσανίδας με βίδες. Δεν χρειάζεται να κόψετε γιγάντιες τρύπες στους τοίχους σας για να κρύψετε καλώδια ή καλώδια. ΚΙΤ ΔΙΑΧΕΙΡΙΣΗΣ ΚΑΛΩΔΙΩΝ – Το κιτ απόκρυψης καλωδίων περιέχει όλα όσα χρειάζεστε για να οργανώσετε αυτά τα ακατάστατα καλώδια. Κάθε σετ διαχείρισης καλωδίων περιλαμβάνει 6 διαδρόμους καλύμματος καλωδίων 1 1/8 x 11/16 x 25 το καθένα, για 150 συνολικά απόκρυψη καλωδίων!.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0643303997327

Κατηγορίες Ηλεκτρονικά, Αξεσουάρ & Προμήθειες, Διαχείριση Καλωδίων, Καλώδια σε ράγες,

Brand	SimpleCord
Color	White
Customer Reviews	4.5 4.5 out of 5 stars 4,382 ratings 4.5 out of 5 stars
Installation Type	Self-Adhesive
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	30 x 5 x 1 inches
Item model number	83-SCCC1000
Item Weight	2.11 pounds
Manufacturer	SimpleCord
Product Dimensions	30 x 5 x 1 inches
Style	White 150"

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: xSC

An Easy and Effective Way to Hide Unsightly Cables

The Simple Cord Cable Concealer On-Wall Cord Covers is a great solution for hiding unsightly cables. The adhesive works well and the product is able to hide the cables very effectively. I was able to use it on the ceiling, it made a big difference in the appearance of my room. I really appreciate the sleek and clean look it gave my home. The only downside I found was that the product did not come with a retail package as depicted in the image. However, this did not affect the performance of the product in any way. Overall, I would definitely recommend this product to anyone looking for an easy and effective way to conceal cables and improve the appearance of their home or office.

Scritto da: Nice-Geek

Improves the look of our cabling significantly - installation was some work

Cable Concealer On-Wall Cord Cover Raceway Kit - Cable Management System to Hide Cables, Cords, or Wires - Cord Organizer for TVs and Computers at Home or in The Office We really needed to tidy up our wall-mounted television cabling and this kit worked quite well. General comments: * We were able to put a large number of cables through the channel: 2 HDMI, 1 Ethernet, 1 pair of RCA AV cables (Red+White), and a Coaxial cable * It helped me to locate studs on the wall to use them as anchor points, rather than the double-stick tape. * I found it much easier to slide the cover panels onto the channels, rather than try to snap them on (or off) * I found it very important to try out the cables in the channels with the covers (slid) on to ensure things fit. * At first, we had a 3-wire component connection cable set that did not fit. I chose to separate the cable into 3 parts, and keep only the Left and Right audio that we wanted, and had to remove a couple of big rubber bumps from the cable also. * I also had to arrange for my HDMI cable lengths to be long enough so that I could keep the cable ends outside the channel, and did not need to put any extenders in the channel. My installation experience: * My installation is a wall-mounted TV over a fireplace mantle, with some cables going to the right of the fireplace and other cables going to the left. * I used a "T" under the TV and fed both left and right sides from there. * I planned the overall route, and identified the studs I was going to use along the way, and measuring lengths to be sure things were centered and balanced. * It was not necessary for every section to have a stud or screw in it. for some ones that did not have a stud, I used double-sided Velcro tape instead of the the included double-sided tape, on the assumption that I was going to need to remove this at some point to adjust the wiring or add new wires. * The key point here is that removing or adding the covers seemed difficult unless you slide them out the end. That being the case, it helped have the ability to unscrew the main section to freely move things around. This would not be the case if they were anchored with double-sided tape. If you use the double-sided tape, make sure you get it right the first time.) * I installed things in sections starting from the TV and working way away from it. * At each step, I would cut the length I needed, check out the cabling for fit with the cover on; then I remove the cover to drill and screw in the channel. Once that was done, I would slide the cover on from the end and go to the next section. The whole thing took maybe an hour since I was figuring out a lot of things by trial-and-error. Now that I think about it, a You-Tube video of installation options might really help others. It may even be out there, but I didn't look at the time. We are very satisfied with the look of the system, even without any painting to match our off-white wall color.

Scritto da: J & M

Perfect!

I used this to conceal wires coming from my projector. Before installing these, the wires were just hanging down and looked awful. They come with two installation methods: adhesive tape or drilling holes. I ended up going the drilled hole route since I did not want to rip paint off the wall in the future when taking these down. I suggest the same if you don't mind a little extra work. The plastic is durable. It recommends using a saw to cut it to desired length (if needed), however I used a strong pair of scissors to cut it which did the job just fine. Maybe not as perfect as using a saw, but it got the job done. For me, the location that I was installing these was very high so I had a difficult time installing since I did not have a ladder. Had it not been so high, I know it would have been fairly easy to install these. I used a small drill bit to drill holes a few inches from each end and then screwed directly into the wall. I didn't even bother to use anchors or screw into a stud. The screws were durable enough and the wires plus concealer didn't have enough tension on the screws to pose a threat to falling out. The whole process took roughly 1 to 1.5 hours to install. I'm very happy with the result and would definitely purchase again for another similar project in the future. One piece of advice is to make sure that the rails line up perfectly when drilling your holes, otherwise you will be left with a slightly off looking track. If you look at my image, you can see this on the far right track. I decided not to correct it because it was so difficult to reach that high to install these in the first place and I just wanted to be finished with the project.

Scritto da: JoJo

No more rat nest!

I got these to clean up the corner in the living room. I had everything bunched together behind the tv and off to the side with no real structure and I hated it every single time I looked at it. I bought these hoping it would help, spent a bit of time planning out where I wanted everything to run and then got to measuring. The instructions show being able to cut these with a hacksaw, but I found that to immediately be a pain. Easiest method would be a miter saw. But I went the rout of a rotary tool and cutoff wheel to get a precise cut. The kit comes with enough hardware to mount it directly into the drywall, or, use a type of 3m sticky tape. I was unsure if the tape would be enough because I had some pretty heavy wires... and a lot of them... that I wanted to hide in the tracks. BUT the tape was plenty, no need to be putting a bunch of holes in the wall and also having to drill holes in the tracks. It is however, kind of a... what is the lesser of the two evils? Putting holes in the wall, or tearing off drywall if you ever need to remove them. In my situation this is the only place in the living room that I can mount these particular things based on where outlets and how the internet was installed so I was fine sticking it directly to the wall. (either option would be a quick fix with the right tools if you ever did need to remove) Make sure if you DO use the tape that you stick it where you want it on the first try because it won't be coming off once it's attached, even a little bit. Good luck!

Scritto da: sundar

Waste of money .. fool us

Substanded product ..high cost low value ..waste of money

Scritto da: Mike Briggs

Alternative to chasing in cable into a wall

Having mounted my TV onto the wall I needed a quick way to run HDMI, Power and Ethernet to the TV. Bought this on a bit of a whim thinking it might not look that good and I can always take it down, but I was really surprised. Not exactly difficult to use, cut to length, peel of the backing paper and stick it on, but the nice touch it takes paint really well. We painted it once it had been up and I was really surprised how good it looks. No two ways about it, you want the ultimate way of hiding cables, chase the brick work, cut a grove and run some duct, but thats expensive. This is really good alternative and painting the same colour as your wall goes a long way to make it less obtrusive. Very recommended

Scritto da: Amazon Customer

Does its job ok

This functions ok. It's relatively easy to install although I did find that the adhesive strips could be a little fickle and take a bit of effort to stay put. I like how it blends in well with the wall (assuming your's is light), it is neat and compact. It can be a little tricky to get all the cables to fit inside the cavity but once installed it does stay in place. I only paid £20 for this, would I pay £35, probably not.

Scritto da: james003

Brilliant product that gives a professional finish to your hard work when decorating.

Superb product and service. Photo doesn't do it justice, but the fact you can paint means it gives a clean, integrated finish. Installation instructions emailed by company helped. Would buy again and definitely recommend.

Scritto da: David

All that you need to tidy up cables!

Contains everything you need to get your cables tidied up and concealed. I have my router mounted near the ceiling of the living room and disliked the 3 cables that would hang down. Used these to tidy them and still have plenty of trunking. Maybe I should do the wall behind my TV/console setup?! It's going to be a lot of fun!