WEN LA164K τσοκ τρυπανιού 5/8 ιντσών με κλειδί με κωνικό κλώνο MT2.

Brand:WEN

3.8/5

50.41

Θυμάστε όταν είχατε το τέλειο τσακ; Ασφαλίστε τα κομμάτια σας με το τσοκ τρυπανιού με κλειδί WEN 5/8 ιντσών. Το κωνικό μας κληματαριά MT2 ταιριάζει τέλεια σε κάθε πρέσα τρυπανιού, τόρνο ή μύλο MT2 και μπορεί να εγκατασταθεί με την απλή βρύση ενός λαστιχένιου σφυριού. Το κλειδί που περιλαμβάνεται ανοίγει και κλείνει με ασφάλεια το τσοκ 3 σιαγόνων γύρω από τρυπάνια και άξονες διαμέτρου έως 1/2 ίντσας. Αυτό το σετ σχεδιάστηκε ειδικά για την κεφαλή ή την ουρά των ακόλουθων μοντέλων τόρνων ξύλου WEN: 3424, 3424T, 3427, 34018, 34027 και 34034. Είναι επίσης συμβατό με τις πρέσες τρυπανιών WEN 4214 και 4225.

Σχεδιασμένο για χρήση με τα μοντέλα WEN 3424, 3424T, 3427, 34018, 34027, 34034, 4214 και 4225. Τοποθετείται εύκολα με το απλό χτύπημα μιας λαστιχένιας σφύρας. Συμβατό με οποιαδήποτε πρέσα τρυπανιού, τόρνο ή μύλο MT2. Ανοίξτε και κλείστε εύκολα τις τρεις σιαγόνες του τσοκ χρησιμοποιώντας το κλειδί που περιλαμβάνεται. Χωράει τρυπάνια, άξονες μανδρελιού στυλό και τεμάχια διαμέτρου έως 5/8 ίντσας.
Batteries Required? ‎No
Brand WEN
Compatible Devices Drilling Machine
Customer Reviews 4.7 4.7 out of 5 stars 250 ratings 4.7 out of 5 stars
Included Components 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper
Included Components ‎5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper
Item model number ‎LA164K
Item Package Quantity ‎1
Item Weight ‎2.46 pounds
Manufacturer ‎WEN
Package Dimensions ‎6.65 x 2.83 x 2.8 inches
Part Number ‎LA164K

3.8

13 Review
5 Star
81
4 Star
13
3 Star
5
2 Star
0
1 Star
1

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Irma Coleman
You need to be sure what morse taper you need
I purchased this drill chuck for a steele products drill press I had purchased at an online auction it looked like the chuck was in it by the pictures but when I picked it up they said it didnt have a chuck. I measured the end of the arbor and it measured to be a MT2 taper. So I ordered this chuck and arbor it works perfectly in my drill press would recommend it at this time only time will tell if its a good product but at this time I have to give it a 5 star rating.
Scritto da: Jeff T
Great tool
Seller was great at getting the one I need for my drill press. We communicated numerous times and was very helpful.
Scritto da: RandyWB766
Nice finish, works good, awesome price
Fast shipping, Great price, Works awesome. I will be ordering another one soon.
Scritto da: Amos Minard
Awesome thanks
Great product
Scritto da: Brandon
Works well
Heavy duty, works well. Only issue so far is the black plastic piece on the back of the shank cracked and fell off the first time I used a push rod to remove from my lathe.
Scritto da: Vermont C.
Works great
Using in my Harbor Freight 12" lathe. Works great.
Scritto da: Joe G.
surprisingly good
I was shocked at how heavy this chuck was. It fits the #2 taper correctly. It does appear to have a tiny bit of runout (not 0.001) but since I'm using it on a lathe that is not a problem. For my purpose I would by again and if need be, would put it in my drill press.
Scritto da: andrew deorio
So far so good
Decent chuck for what you're spending. Tail was too short to release from my southbend 9 tailstock. The back end is threaded though so I loctited an extension in.
Scritto da: analog56x
A bit crunchy out of the box, great now!
The chuck felt a little crunchy out of the box, but after cycling it a couple times, it feels great. the accuracy is not spot on, but its close enough for hobby stuff. the mt2 taper is perfect on it, it seats nice and tight. i swap it between my drill press and my lathe, as ive blown up the other 2 chucks that i had (not this brand). curious to see how long this one lasts.
Scritto da: xgx
Use mostly for turning pens
We'll centered, no wobble. Use mostly for items without issue and occasionally for drilling. Great value
Scritto da: Amazon Customer
Drill chuck
Use it on lathe does the job
Scritto da: Serge
bon produit
utiliser pour mon mini tour
Scritto da: Carl
tres bien
tres bien

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array