Toolocity SCB0312D 3-1/2-ιντσών Monster Dry/Wet Diamond Granite/Crete Core Drills/Top πριόνια

Name: Toolocity SCB0312D 3-1/2-ιντσών Monster Dry/Wet Diamond Granite/Crete Core Drills/Top πριόνια
Brand: Toolocity
SKU: 0618838420251
Price: 126.53 EUR
Availability: InStock

Brand:Toolocity

3.4/5

€
126.53

3-1/2 Monster Dry/wet Diamond Granite/ Τρυπάνια με πυρήνα σκυροδέματος/ Πριόνια οπών. Τα DRY Diamond Core Bits - Monster Brand είναι σχεδιασμένα για να ανταποκρίνονται στις απαιτήσεις ολοένα και περισσότερων εφαρμογών γεώτρησης πυρήνα απευθείας στα εργοτάξια. Αυτά τα υψηλής ποιότητας κομμάτια πυρήνα διαμαντιού μπορούν να χρησιμοποιηθούν τόσο στεγνά όσο και υγρά σε πάγκους από γρανίτη και σκυρόδεμα. Μπορούν να χρησιμοποιηθούν για το τρύπημα πλακιδίων πορσελάνης πολύ αποτελεσματικά, εάν η κοπή των άκρων δεν προκαλεί μεγάλη ανησυχία. Η μέγιστη ταχύτητα για τα bit είναι 4500 RPM. Η χρήση νερού για να κρυώσει το κομμάτι συνιστάται ιδιαίτερα για να παρατείνει τη ζωή τους.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0618838420251

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Ανταλλακτικά και αξεσουάρ τρυπανιών ισχύος, Διατρητικά με πυρήνα, Τρυπάνι Bits,

συνιστώμενη ταχύτητα 3000-6000 σ.α.λ. χρησιμοποιήστε υγρό ή στεγνό. Διαρκεί για δεκάδες τρύπες ανάλογα με τα υλικά. Το νήμα 5/8 ταιριάζει σε στιλβωτές/τριβές. Σχεδιασμένο για διάτρηση γρανίτη και σκυροδέματος.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver, Black
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 39 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎SCB0312D
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Applied Diamond Tools
Material	‎Sintered Diamond Segments
Number of Handles	‎1
Number Of Pieces	‎1
Part Number	‎SCB0312D
Product Dimensions	‎3.5 x 3.5 x 3.5 inches
Style	‎Compact

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Mike-K

Works well. Just be very careful of your wrist when drilling.

These work just fine through an un-grouted cinder block wall. It does a nice clean job. But be aware that it's easy to break a wrist with one of these things if you're not careful. To start, I sincerely encourage you to use a ROUND core bit adapter (aka 'arbor'), like the Toolocity AD1112. The round shank will permit the drill's chuck to slip if you bind-up. Otherwise, it's your wrist that'll break. If you use a beveled bit-adapter, like the ToolCity 0038, that chuck will NEVER slip (actually, there's so much force applied that the damn arbor will bend like a pretzel) Next, consider buying a concrete arbor with a pilot drill. That's money well spent cause you'll be far less likely to bind-up. If you don't use a arbor with a pilot, you'll have to make a jig out of plywood to hold the core (otherwise it just skips around and you can't start the hole). If you're gonna drill, say, a 3.5" hole into cinder-block, first cut a round hole in a 10"x10" square of plywood using a sawzall bit. Then drill masonry-screw holes in each corner and attach it to the wall. That'll keep the core bit from moving around. When you drill, drill as slowly as your patience permits so if it binds it'll be manageable. Whatever you do... always position your wrist so you can let go WHEN it binds (and believe me, it will bind!).

Scritto da: Van77

Cheap and decent hole saw

Cheap and decent hole saw. Cut red brick like butter

Scritto da: wes

start drilling at an angle and slowly roll up until vertical to surface you are drilling

I used this to drill hole in the house footings to place a fence post close to the house. It worked well in concrete, but more teeth would make it not bounce as much. I used the water hose to keep it cool and keep the dust down. I used bits like this for 20 years in the granite countertop industry.

Scritto da: Aleks K

Works good.

Would be better of it had a guide drill. You will need the recommended accessories for it to attach to your drill. I used it for edging pavers.

Scritto da: rebundy

It cut thru 1 1/2 inch of tile and concrete like butter. Perfect circular opening to accept my Kohler ...

Didn't have to hire a plumber. It cut thru 1 1/2 inch of tile and concrete like butter. Perfect circular opening to accept my Kohler valve. I did make a jig out of 3/8 plywood to keep it from skipping all over the tile shower wall. Used the bit itself to cut a hole in the plywood. It looks like new and I'll keep it to use again or loan to folks

Scritto da: Mary

Concrete Core saw

excellent Concrete Core Saw

Scritto da: larry blanc

worked great. use water to keep it cool

cut 4 3 1/2 holes in granite with no problem at all, worked great. use water to keep it cool, but be ready when it starts to throw granite mud around. also bought a 1 1/2 as well and it worked just as good. Great Tool.

Scritto da: Plum Crazy

Great tool!

Did a fine job of boring through cinder blocks, although lack of a centering bit makes it tricky starting on desired centerlines.