Shepherd Hardware 9908 1-ιντσών Felt Gard με σπείρωμα επίπλων με στέλεχος, διάμετρος στελέχους 1/4 ίντσας, 4 Count, Tan

Brand:Shepherd Hardware

3.4/5

25.59

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Τα Shepherd Hardware 1 ιντσών Feltgard Plus Round Felt Stem Glides (4-count) είναι σχεδιασμένα για χρήση με οθόνες, εξοπλισμό γραφείου και οικιακά έπιπλα με υποδοχές με σπείρωμα. Βοηθά στο επίπεδο των επίπλων σε ανώμαλα δάπεδα. Διαθέτουν πάτο από τσόχα που μειώνουν την τριβή και τον θόρυβο και αποτρέπουν το ξύσιμο των δαπέδων από σκληρό ξύλο και laminate. Συνδέονται εύκολα με στελέχη με κλωστή 1/4 ίντσας x 20 x 1 ίντσας. Προσφέρει ανώτερη προστασία δαπέδου με δυνατότητα ρύθμισης ύψους. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Shepherd 1 βαρέως τύπου σπειροειδές στέλεχος FeltGard glides προσφέρουν ανώτερη προστασία δαπέδου με δυνατότητα ρύθμισης ύψους.

Το κιτ Περιέχει (4) στρογγυλό ταύ πλαστικό 1 ίντσας και βάσεις μπεζ βαρέως τύπου με σπείρωμα + (4) πλαστικά εσωτερικά ένθετα με σπείρωμα - 4 Καταμέτρηση. Δεν προορίζεται για χρήση σε γωνιακά πόδια καρέκλας ή τραπεζιού, αλλά ο σχεδιασμός με σπείρωμα επιτρέπει την προσαρμοσμένη ευθυγράμμιση και ρύθμιση ύψους. Εύκολη εγκατάσταση - Προ-τρυπήστε την πιλοτική οπή διαμέτρου 11/32 ίντσας 1 ίντσας σε ξύλινο πόδι για να τοποθετήσετε με ασφάλεια την πλαστική υποδοχή πριν βιδώσετε τη βάση με σπείρωμα. Γκρι πλαστική βάση με στέλεχος με σπείρωμα από χάλυβα και βίδες κάτω από μπεζ τσόχα βαρέως τύπου σε πλαστικές υποδοχές με σπείρωμα για προσαρμοσμένη ισοπέδωση. Η τσόχα επιτρέπει τη διακριτική κίνηση χωρίς γρατσουνιές σε δάπεδα από ξύλο, πλακάκια και laminate, αλλά ορισμένες εφαρμογές δικαιολογούν μεθόδους στερέωσης πέρα ​​από την παραδοσιακή αυτοκόλλητη.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Shepherd Hardware
Color Tan
Color ‎Tan
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 456 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎4 Glides
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎9908
Item Package Quantity ‎1
Item Weight ‎1.13 ounces
Manufacturer ‎Shepherd Hardware
Material Felt
Material ‎Felt
Number Of Pieces ‎4
Part Number ‎9908
Product Dimensions 3.63"L x 1"W x 4.56"Th
Product Dimensions ‎1 x 3.63 x 4.56 inches
Shape Round
Shape ‎Round
Size ‎1 Inch

3.4

8 Review
5 Star
70
4 Star
14
3 Star
7
2 Star
3
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Joelle
Came with nylon socket insert
Yes, it came with nylon socket inserts, thanks to the seller for answering my question because there are conflicting answers from users. I ordered it right away as soon as I got the answer. I made a leveling board for doming uv resin, and this worked perpectly to what I needed. The nylon insert is a little loose to the screw but for my purpose of leveling, that is fine. For table, I'm not sure but then I did not test it so its just an opinion. For the price, this is 5 star for me. I don't have the exact drill bit but I have a 3/8" bit that is 1/16th short plus a little hot glue and that worked.
Scritto da: Peter C.
Great product, but wrong pre-drill size called out for inserts
This is a great product, but the instructions call for drilling a 11/32 inch diameter pilot hole for the plastic inserts. 11/32 inch drilled holes are too small for the inserts to fit into. The CORRECT size hole is 23/64 inch diameter (somewhat of an odd size).
Scritto da: KM
So far, so good! (Updated)
Update 5-16-18: It's been a about 4-5 months now, and my chair is losing 2 of the felts. I eat 2 meals a day in that chair, so in once, out once, and that's it - twice a day. I knew they wouldn't last forever, but I was hoping for longer than this. My floor is smooth, 1 foot square tiles, with rounded edges to a 1/4" grout line, that's about 10 yrs old, so well worn in. Nothing really to catch the felts on, so no reason for them to come off so soon, IMHO. These didn't last any longer than the stick on felts, but they cost a lot more, and made me drill huge holes in the legs of my chairs. Not good. Knocking off a star for that. ---------- Original Review: -------------------- So far, so good! Pros: * Easily enough installed. Drill hole, insert plug, screw in base, attach felt pads. * Adjustable screw lengths allows for leveling uneven chairs, just by unscrewing the short leg a bit more. Helpful side benefit! * The screw base has a lip, which the felt pads sit inside, stopping them from sliding off, as happens when you just add the felt to the legs normally. * Feels sturdy. 200+ lb folks have sat in these chairs, & no issues, so far. (Only used them for about 2-3 weeks, so time will tell.) * The included felt pads are nice & thick, so they should last a long time. A light gray color doesn't show dirt so much. They slide over the tiles quite well. Cons: * Drill bit size is a pain to find. Why in the heck they chose to use a drill bit size that is so uncommon is beyond me. I have a TON of drill bit sets, & had to go out to a 30 yr old set to even find that specific drill bit. That is just stupid. * Most of this is plastic, so the "so far" comments are a real concern, over time. * Drill bit required is pretty substantial, so you need to be using fairly thick & sturdy legs, or risk undermining them. * These do not pivot, so there is no room for error, beyond the flexibility of the felt pads. My legs are slightly angled in as they rise, so you have to be sure the drill goes in straight to the floor - not the angle of the legs, so it sits flat when you stand it up. (I put tape on my drill bit, to be sure I didn't go in too deep). Overall, I love this for now, & if it holds up, Yay! I'll have to buy replacement felts over time, but they're pretty thick, & hopefully will not rip out any time soon. Side note - these do raise the height of the chairs a bit, so if you're sitting low, that's a benefit, but if you're already barely clearing the table, this is going to raise you up 1/3-1/2" minimum. Sounds like nothing, but we felt it, when we sat down the first time.
Scritto da: ES
nice chair heighten
Wish this screw was longer. 1 1/2 in long.
Scritto da: johanna
table feet
Easy to install and worked exactly for what it was designed for.
Scritto da: Steve Bannister
Prevents damage to the floor.
Protects your floors. We purchased an antique curio cabinet that originally had small wooden wheel casters installed, these were no longer available. The four legs had the original steel sockets for the casters and removal could damage the wooden legs, something had to take their place. These new furniture glides have threaded mounting shafts slightly smaller than the original caster stems therefore required winding duct tape around the shaft to stabilize the glides within the steel sockets. Worked as well as expected and won't damage the wood floors.
Scritto da: S_Lam
Easy Install, Great Floor Protection!
These are super easy to install. All you need is a drill and the appropriate drill size. It calls for an 11/16" bit (who has one of those?!) So I just used a 5/8" bit and rotated the drill around a bit to widen the opening. All in, super easy! Used them on each of the dining room chairs. Now I don't need to worry about scratching the floor all up.
Scritto da: kto
I love the adjustability.
We made some legs to lift some tools in our home shop, but needed to be able to level them. The tools are not heavy, per se, so drilled hole and added nutserts and they are working quite well.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array