NDS 1216 Catch Basin Riser για τετράγωνο 12 ιντσών αποχέτευση λεκάνης και 12 ιντσών αποστράγγιση προσαρμογέα χαμηλού προφίλ, μαύρο

Brand:NDS

3.7/5

80.50

Η σύλληψη επιφανειακών υδάτων όμβριων υδάτων με λεκάνη συλλογής που βγαίνει βαθύτερα στο έδαφος δεν αποτελεί πρόβλημα με το 6 in. Catch Basin Riser. Η ανθεκτική προέκταση πολυστυρενίου προσθέτει έως και 6 ίντσες σε ύψος έως 12 ίντσες. Τετράγωνες λεκάνες συγκράτησης και προσαρμογείς χαμηλού προφίλ, εξαλείφοντας την ταλαιπωρία της υποβάθμισης ή των άβολων συνδέσεων σωληνώσεων.

Δεν υπάρχουν διαθέσιμες μονάδες
ΚΑΤΑΣΚΕΥΑΣΜΕΝΟ ΓΙΑ ΤΗ ΔΙΑΡΚΕΙΑ: Κατασκευασμένο από ανθεκτικό πολυστυρένιο επεξεργασμένο με αναστολείς υπεριώδους ακτινοβολίας για να αποτρέπει το ξεθώριασμα και το ράγισμα. ΜΕΙΩΝΕΙ ΕΠΙΠΛΕΟΝ ΣΚΑΨΙΜΟ: Εξαλείφει την ταλαιπωρία της υποβάθμισης ή της άβολης σωλήνωσης. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ: Στοιβάζεται ακριβώς πάνω από 12 ίντσες. Αποχέτευση καταιγίδας Catch Basin, ταιριάζει σε σχάρα αποστράγγισης λεκάνης 12 ιντσών. βαθμολογία φορτίου με βάση τον τύπο της εγκατεστημένης σχάρας. ΕΡΓΑΣΙΕΣ ΣΕ ΠΟΙΚΙΛΙΑ ΤΟΠΟΘΕΣΙΑ: Αποστράγγιση επιφανειακών υδάτων από χλοοτάπητες, διαμορφωμένους χώρους, κάτω από στόμια, αυλές και διαδρόμους. ΠΡΟΣΘΕΤΕΙ ΕΩΣ 6 ΙΝΤΣΕΣ ΥΨΟΥΣ για να συλλάβει νερό από την επιφάνεια. ιδανικό για μια λεκάνη αλιευμάτων που βρίσκεται πιο βαθιά κάτω από το έδαφος. Το riser μπορεί να κοπεί σε μέγεθος με ένα πριόνι για να φιλοξενήσει το έργο σας.
Brand NDS
Color Black
Connector Type Adapter
Country of Origin USA
Customer Reviews 4.7 4.7 out of 5 stars 458 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 12.38 x 7.13 x 12.38 inches
Item model number 1216
Item Weight 0.17 Pounds
Item Weight 2.72 ounces
Manufacturer NDS Raindrip
Material Metal
Number of Pieces 1
Product Dimensions 12.38 x 7.13 x 12.38 inches
Size 12 inches
Thread Type NDS

3.7

9 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: David p
Worked great
This worked really good for my floor drain I know that's not what was for but it fit perfectly and I like how tight the lid fits
Scritto da: ..
Perfect fit as is
This riser was a perfect fit for extending the height of my NDS 12-inch catch basin. The screws fit and it's a solid connection without tape. The top grate also lines up perfectly. Though I don't buy the assertions that you can cut the bottom off to adjust the height - you would lose strength, stability, and attachment features if you do that.
Scritto da: Valley1
Good Extension for adjusting drain height.
Good Extension for adjusting drain height. These are easy to cut to the proper height so that the drains are at proper ground level.
Scritto da: Scelsi
Works great!
Fits perfectly and was a good price. These jokers are expensive!
Scritto da: Mr. Bob
Quality and perfect fit
It was a perfect fit with the basin I had installed years ago and very bit as sturdy. It comes with screw holes, but no screws. I chose to add sealant between the riser and the original basin but there is not as much flat surface contact between the riser and the basin as I expected. All in all though, it was exactly what I needed. A sturdy solution to the problem of a basin that was just too low.
Scritto da: TCH
works as designed and more
Didn't nee the full height, so I trimmed almost half of it off with a cutting blade on my grinder. It still fit fine and now the catch basin is the correct height with the riser installed. Just exactly as planned. I'm happy.
Scritto da: getwhatu$4
8" tall can be cut to fix requires patience and work
If you have mounted the lower box parallel to grade it's great for extending 8 inches however you might not need 8 inch depth or one side needs to be lower to account for slope of pipe. Would gladly pay more for an adjustable extension. I cant be the only one thinking this. Can't find any sizes in between. I wound up cutting it on an angle to get to proper grande then siliconed it in place and some cement outside the box at the seam below grade. If you just stack it there is a hole to screw the extension to the box but soon as you cut the extension along goes the mounting screw holes. Hope this helps.
Scritto da: Outdoorsman
Worked as intended
Solid product. I had to cut 6" off. I used sawall with fine/metal cutting blade. During cutting, the polymer would melt and fuse back together at times. I had to cut slow, let it cool and continue. It's the only product that will fit and extend the depth of my basin, so I can't complain too much.
Scritto da: jimbow
No problems
No issues.

Σχετικά προϊόντα

hot
Teddico/Bwf 502V Gutter-Elbows
0.1/5

€ 27.39

Teddico/Bwf 502V Gutter-Elbows
0.1/5

€ 27.39

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array