Μικρά εξαρτήματα 18-8 ράβδος από ανοξείδωτο χάλυβα με πλήρως σπείρωμα, 3/8-16 μέγεθος κλωστής, 36 μήκος, δεξιόστροφα νήματα

Brand:Small Parts

3.8/5

30.65

Αυτή η πλήρως σπειρωμένη ράβδος είναι κατασκευασμένη από ανοξείδωτο χάλυβα 18-8 για αντοχή στη διάβρωση, έχει 3/8-16 δεξιόστροφα σπειρώματα και έχει μήκος 36. Οι ράβδοι και τα καρφιά με σπείρωμα είναι συνδετήρες που βιδώνουν σε παξιμάδια με σπείρωμα ή τρύπες με σπειρώματα, επιτρέποντας τη συναρμολόγηση των εξαρτημάτων. Η διαφορά μεταξύ ράβδων και καρφιών είναι το μήκος: Γενικά, ένα καρφί έχει μήκος έως και 1 πόδι και μια ράβδος έχει μήκος περισσότερο από 1 πόδι. Και τα δύο έχουν κλωστές σε μέρος ή σε όλο το μήκος τους. Αυτά που έχουν μερική σπείρωμα έχουν ίσα ή άνισα μήκη νήματος στο ένα ή και στα δύο άκρα. Διατίθενται επίσης καρφιά με διάτρητη βάση, προεξοχές συγκόλλησης ή κεφαλή δέσμευσης με πίεση για στερέωση στην επιφάνεια ενός εξαρτήματος.

Κατασκευασμένο από ανοξείδωτο χάλυβα 18-8 για αντοχή στη διάβρωση. Ράβδος με πλήρες σπείρωμα.
Country of Origin China
Grade Rating 18-8
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 36 x 0.38 x 0.38 inches
Item model number B00G3PEUD4
Manufacturer Small Parts
Material Stainless Steel
Product Dimensions 36 x 0.38 x 0.38 inches; 14.4 Ounces
Thread Coverage Fully Threaded
Thread Size 3/8"-16

3.8

9 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
0
1 Star
1

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: islandlady
Works fine
I wish I could say what this was for, but it was a tool my husband needed. It worked and did the job just fine.
Scritto da: the reviewer
Wow, this stuff is strong. Not brittle . Clean, no redsidual machining oil. Real Stainless
18-8 thread, stainless steel rod. Wow this is much better quality than I was expecting. I tend to use a bit of stainless steel for my projects. Have blades for my reciprocating saw ( Saws All ) designed to cut Stainless steel. This rod is such high quality, when cutting to length for my project, it took two of those blades to cut through the threaded rod ( not unusual when dealing with the good stuff ). The threads are cut from end to end. Ends are machined smooth. Threads are true to size. No slop in nuts, as if cut if between SAE and Metric, these are EXACTLY cut to 18-8 nice and tight. Had a piece left over. Tried to bend it. Took some effort. Rod bent, did not break. Wow ... over kill for my project. Thinking will last well over 100 yrs. Threads will stay clean and completely usable. NOTE *** with Stainless steel, the edges of threads may gall ( bend over ), use milk of magnesium ( yes same stuff one might use for upset stomach) , or anti sieze, on your threads, bolts and nuts. Turn the bolts slowly and make sure are not cross threading. This is with EVERY stainless steel bolt, screw, nuts. If threads ( ramps ) on bolt gall, they will cause the nut to bind, maybe midway to being fully tightened, especially with low grade stainless steel products from Big Box hardware stores. Use a dry lube or anti seize .. look on line for more info.
Scritto da: Tony
Great
Very good for the money. I did have a very minor imperfection in the thread. Could have been knocked around, and not an actual defect. Overall, I am very happy with it, a much better deal than the local big box hardware store.
Scritto da: Rick
Quality
Bought these to make replacement studs on my outboard motor restoration, worked great and won't have to worry about corrosion.
Scritto da: SteveO
Nice part
good buy
Scritto da: Pamela Pierce
Exactly as specified.
I went to the local hardware and bought nuts for this rod and the nuts fit without any problem, so I'd say the threaded rod is well made and good for use with standard nuts in USA - 3/8" - 16 nuts. I cut the rod with my angle grinder, no problem. I like the fact that the rods are stainless steel. A quality product.
Scritto da: DMD
Worked well.
Worked well. Did the job. Price was good.
Scritto da: Pete
solved the problem
These are bright stainless steel, reasonably priced, and I don't have to buy 20'.
Scritto da: Anoop Dwivedi
perfect threaded bar for stable setups
I have a telescope mount that fits on a photo tripod using a 3/8" stud but stud was too short and when used with a pier it wont work. I was looking for a longer 15-18" threaded bar but couldnt find any. This seems like the closest fit. it work on my setup like a charm. I am able to fit this from the bottom of the mount, through the 21" pier into the mount base. I havent figured out what to do with extra 18" length but probably I will cut it in half and use both on different setups. The bar is made up of steel and looks and feels very strong and well made.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array