Καρφωτό πλαισίωσης BOSTITCH, Χαρτοταινία 33 μοιρών (F33PT)

Brand:BOSTITCH

3.4/5

459.42

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Αυτό το καρφωτικό πλαισίωσης χαρτοταινίας 33 μοιρών έχει σχεδιαστεί για να κόβει καρφιά σε κατασκευασμένη ξυλεία. Το καρφωτικό πλαισίου BOSTITCH είναι ελαφρύ για εύκολη διαχείριση και μπορείτε να ελέγξετε το βάθος του νυχιού με ένα κουμπί. Βασιστείτε σε αυτό το καρφωτικό πλαισίωσης χαρτοταινίας 33 μοιρών για αποτελεσματικότητα. AMAZON.COM Πλαισιοποίηση, επένδυση, επένδυση, τοποθέτηση μεταλλικών συνδέσμων, στερέωση ξύλου στην τοιχοποιία, τράβηγμα μεγάλων καρφιών σε σκληρή κατασκευασμένη ξυλεία -- όπως το πείτε -- αυτό το ευέλικτο και ελαφρύ καρφωτικό πλαισίωσης της Bostitch τα κάνει όλα. Δύο καρφωτικά σε ένα, αυτό το πιστόλι πλαισίωσης περιλαμβάνει δύο μύτης γρήγορης αλλαγής για τη μετατροπή του εργαλείου είτε για πλαισίωση είτε για εφαρμογές μεταλλικών συνδέσμων. Η εργοστασιακά εγκατεστημένη διαδοχική σκανδάλη και η αποκλειστική έξυπνη σκανδάλη της Bostitch εξασφαλίζουν βέλτιστο έλεγχο και ταχύτερη παραγωγή. Λειτουργώντας είτε σε λειτουργίες πρόσκρουσης είτε σε διαδοχική πυροδότηση, το ελαφρύ περίβλημα από μαγνήσιο του εργαλείου σημαίνει εύκολο χειρισμό και αξεπέραστη ανθεκτικότητα. Με βάρος μόλις 7,9 λίβρες, το εργαλείο χειρίζεται εξαιρετικά σε στενούς χώρους, όπως σοφίτες και κατά τις κατά τα άλλα εργασίες που καίνε τους ώμους. Ο πρωτοποριακός σχεδιασμός είναι επίσης θεϊκός όταν καρφώνετε τις επάνω πλάκες στις αρθρώσεις του δαπέδου ή όταν σέρνεστε κάτω από αυτό το χαμηλό κατάστρωμα για να ενισχύσετε τη νέα υδρομασάζ. Ένα πατενταρισμένο κουμπί ελέγχου βάθους κίνησης σημαίνει φυσικά ότι δεν υπάρχει ρύθμιση πίεσης συμπιεστή, αλλά και ότι δεν χρειάζεται να ψάξετε για εργαλεία ή άβολους διακόπτες όταν στέκεστε σε μια απότομη οροφή. Απλώς ρυθμίστε τον συμπιεστή στα 80 psi και προσαρμόστε το βάθος όπως χρειάζεται. Η μονάδα χρησιμοποιεί συνδετήρες STRAPSHOT 1-1/2 ιντσών καθώς και όλα τα μεταλλικά καρφιά σύνδεσης 1-1/2 και 3-1/2 ιντσών με μέτρηση 0,131 σε διάμετρο 0,162 ίντσες. Μια εναλλάξιμη άκρη βοηθά στην τοποθέτηση των καρφιών με ακρίβεια για εφαρμογές μεταλλικών συνδέσμων. Αυτό το καρφωτικό, ένα από τα πιο ισχυρά πλαίσια στην κατηγορία του, προσφέρει 1.050 in./lbs. οδηγικής ισχύος. Για λιγότερο χρόνο διακοπής λειτουργίας και μεγαλύτερη παραγωγικότητα, μια οδοντωτή ένδειξη διάταξης 16 ιντσών στον γεμιστήρα βοηθά στην επίτευξη της σωστής απόστασης μεταξύ των καρφιών σε λίγα δευτερόλεπτα. Και, ατσάλινα προστατευτικά φθοράς με μπουλόνι, με ενσωματωμένα λαστιχένια μαξιλαράκια ολίσθησης, προστατεύουν το εργαλείο από χτυπήματα και πτώσεις για αξεπέραστη αντοχή και χρόνια χρήσης. --Brian D. OlsonWhats στο BoxNailer, εναλλάξιμη άκρη ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Το BOSTITCH F33PT είναι ένα καρφωτικό πλαισίωσης με χαρτοταινία 33 μοιρών που μετατρέπεται σε καρφωτικό με μεταλλικό σύνδεσμο μέσα σε λίγα δευτερόλεπτα! Αυτός ο εξαιρετικός σχεδιασμός οδηγεί τα καρφιά πλαισίωσης μεταξύ 2 ιντσών και 3-1/2 ιντσών σε μήκος (0,113-,162). Το εργαλείο περιλαμβάνει μια εναλλάξιμη μύτη για την οδήγηση μεταλλικών καρφιών σύνδεσης (μήκους 1-1/2 έως 2-1/2 ίντσες) με ακρίβεια σε εξοπλισμό, όπως δεσίματα τυφώνα και κρεμάστρες δοκών. Έχετε το πλεονέκτημα δύο εργαλείων σε ένα, κανένα άλλο ανταγωνιστικό πλαίσιο δεν μπορεί να ταιριάξει με αυτές τις δυνατότητες. Το F33PT παρέχει ένα ελαφρύ περίβλημα από μαγνήσιο (με βάρος μόνο 7,9 λίβρες) και έχει 1050 in./lbs. κινητήρια δύναμη για την αντιμετώπιση ακόμη και των πιο σκληρών εφαρμογών μηχανικής ξυλείας. Ο ρυθμιζόμενος οδηγός βάθους με το κουμπί ρυθμίζεται άνετα στα επιθυμητά βάθη. Επιπλέον, το F33PT διαθέτει μια μοναδική ένδειξη διάταξης 16 ιντσών για την επίτευξη της σωστής απόστασης μεταξύ των καρφιών σε λίγα δευτερόλεπτα χωρίς τη διακοπή μιας μεζούρας. Να είστε σίγουροι ότι αυτό το εργαλείο τα κάνει όλα. Δείτε περισσότερα

Δεν υπάρχουν διαθέσιμες μονάδες
Ελαφρύς σχεδιασμός μαγνησίου για πρόσθετη αντοχή. Περιλαμβάνει 2 μύτης γρήγορης αλλαγής για μετατροπή του εργαλείου σε εφαρμογές πλαισίωσης ή μεταλλικών βυσμάτων. Ισχύς οδήγησης 1050 ίντσες ανά κιλό για σκληρές εφαρμογές μηχανικής ξυλείας. Η δυνατότητα μεταλλικού συνδετήρα περιλαμβάνει εναλλάξιμη άκρη για χρήση σε κρεμάστρες δοκών, ιμάντες τυφώνα κ.λπ. Οδηγεί καρφιά πλαισίου με χαρτοταινία 2 έως 3-1/2 ιντσών και χαρτοταινία 1-1/2 έως 3-1/2 ιντσών μεταλλικά συνδετικά καρφιά. Οδηγεί συνδετήρες STRAPSHOT 1-1/2 ιντσών καθώς και όλα τα άλλα μεταλλικά καρφιά σύνδεσης 1-1/2 ιντσών και 2-1/2 ιντσών (διάμετρος 0,131 ιντσών - 0,162 ιντσών). Το ρυθμιζόμενο άγκιστρο δοκών επιτρέπει στους χρήστες να κρεμούν το εργαλείο σε δοκούς και δοκούς. Ελαφρύς σχεδιασμός μαγνησίου για ανθεκτικότητα. Ο πατενταρισμένος ρυθμιζόμενος οδηγός βάθους κουμπιού του πιστολιού καρφώματος πλαισίωσης ρυθμίζει τα καρφιά στα επιθυμητά βάθη. Δύο καρφωτικά σε ένα: περιλαμβάνει δύο ακροφύσια γρήγορης αλλαγής για τη μετατροπή του εργαλείου σε εφαρμογές πλαισίωσης ή μεταλλικών βυσμάτων.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Multi
Customer Reviews 4.4 4.4 out of 5 stars 143 ratings 4.4 out of 5 stars
Included Components ‎PAPER COL FRAMING NA
Is Discontinued By Manufacturer ‎No
Item model number ‎F33PT
Item Package Quantity ‎1
Item Weight ‎1 pounds
Manufacturer ‎BOSTITCH
Material ‎Metal
Measurement System ‎Inch
Part Number ‎F33PT
Power Source ‎Air Powered
Product Dimensions ‎18.7 x 1 x 5.6 inches
Size ‎One Size

3.4

11 Review
5 Star
75
4 Star
11
3 Star
4
2 Star
2
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Jeremy P. Holt
Worked perfect
Shot 600 3.5” deck nails right out of the box — not 1 jam or double feed — literally not one issue … the 33 degree nails seem to be hard to find at local stores though …but widely available inline.
Scritto da: EDN
Fantastic and powerful 2-in-1
Works as advertised. Bought this to build a large deck. Worked great with Hanger nails attachments and powerful for the 3-inch framing nails. If you're going to buy a mailer, this is the one to get. No need for two separate ones unless you're doing large volume and switching often. Even so, nail guides are easy and quick to change from framing to hanger nails. Did about 10000 nails and not a single jam.
Scritto da: fishfishy
Nice framing nail gun at a good price
I bought this nail gun for some framing work. Its powerful and drives framing nails nicely. I have a cheap no brand compressor that couldnt deliver an adequate flow rate for this gun (it resulted in nails that werent driven in properly). I removed the old regulator and installed a Jet 3/8" FRL. I use 3/8" air hose to connect the nail gun from the compressor. I adjusted the compressor so that the cut-in pressure is at 95 PSI and the FRL regulated at 95PSI. This resulted in predictable and consistent driving pressure- perfect nail depth each time. The nail depth adjustor is easy to use. This gun is at a good price and has saved me alot of time and work (compared with nailing framing using a hammer). Its handled some abuse and some knocks (all accidental of course) and nothing has fallen apart yet. The only negative thing I found is that the spikes lose their sharpness quickly. I use LOSP treated Oregon framing timber which has a slippery surface and the timber spikes occasionally dont grip very well when toenailing or nailing at an angle. This nail gun uses 34 degree D-shaped collated framing nails. This is the standard framing nail type we use in this side of the world. My readings on Amazon.com is that some building regulations require a round head framing nails- you'll probably need a 21 degree collated nail if that is the case. Happy nailing.
Scritto da: Nathan Hertel
Pays for itself in a day
I do a lot of renovations, but not that much heavy framing, so I didn't even know they had a framing nailer for metal connectors and I've been doing things the long way. After a whole house worth of hurricane ties and a large deck of joist hangers, this was a rockstar purchase. I've probably put at least 2000 nails through it with no holes missed. I like the paper tape 33° option of this gun so I don't have to refill clips as often. The nailer is on the heavy side and isn't as well balanced as other tools, but everything feels well-built, I had no jams, and it does exactly what it was supposed to exceptionally well. You can change out the precision point pressure trigger for a traditional framing trigger with the push of one button, excellent design. **** Other reviewers have noted they can't find 33° nails at any stores, I've had no problem with 30° Paslode nails which are in stock at my Home Depot and Lowe's. I've gone through almost a whole 2000 nail box of 2 3/8 inch nails and can't recall a single jam.
Scritto da: J. Treg
Would Not Feed Framing Nails - Returned - Updated
I really, really, really wanted this nail gun because of its framing AND strap-hanger abilities. I may change this rating if the replacement F33PT works as described. The first one would fire a framing nail, then fire blanks. If you racked [pull back and release] the loader, it would fire a nail . . . then blanks. If you racked it each time before firing, it would fire a nail. I tried Simpsons (33-degree), Paslode (30-degre), and Bostitch (33-degree). When unloading the nails, the stick would not slide back with just thumb pressure, as they do in other nail guns. I had to insert a nail in between nails in the stick and pull them back - yes, holding the nail release - to get them loose. I believe something is jamming the nails at the feeding point. I am now finding that 33-degree nails are really difficult to find! They are also expensive. One reason I chose this nail gun is because others' reviews said it fired Paslodes 30-degree framing nails quite well. Since this gun didn't fire any framing nail well, I will reserve commenting on that until I get the replacement gun. I owned this gun three days, and fired 25 nails through it. The strap hanger tip is great for precise placement. UPDATE: Amazon is wonderful in its return and turn-around time. That said - The new one still will not continuously fire other framing nails by other manufacturers. Bostitch nails are EXPENSIVE and hard to come by. Thank God this isn't a requirement, but a nice to have with my projects. Whoever said it would fire Paslodes it totally incorrect in my experience. Do not buy this nail gun - the recurring cost of nails will be very, very expensive. Update #2: this nail gun is unsupportable for framing. I have tried to find Bostitch brand framing nails, and they cannot be found. What good is a nail gun if you cannot buy nails it will fire? Every place I tried, including Amazon, says, "Nails are back-ordered and we have no idea when they will come in. I wish I could rate this a negative number.
Scritto da: M. J. Ince
Powerful, Versatile, Flawless Function
I am totally satisfied and happy with this purchase of the Bostitch F33PT nailer. It is powerful and fairly lightweight. It comes with two barrel attachments, one with a point that finds the hole in metal hangers used for joists, and the other for general framing. It's quick and easy easy to change over from one to the other; just press one button and the attachment slides out and slide the other one in. I'm using galvanized nails 2.5" x .161 diameter for hangers, and 3.25" x .131 diameter for framing. A nail guidance dowel must be moved from one hole to another for these two sizes but it is quick and painless. I framed a great room sub-floor using metal hangers and this nailer worked perfectly. Saved a lot of time. I ordered the 33-degree paper tape nails from Amazon and they worked great. Nailer comes with two triggers, but I haven't tried the "contact trip" yet which shoots on contact. I've only had this a few weeks but I like it a lot! UPDATE 2/8/19: Still working great! Best tool investment I made!
Scritto da: john cansdale
Ideal first fix nailer
Heavy nail gun but is first rate for my busy construction life and no need for gas cylinders that can go out of date if not used, just hook it up to my compressor and away I go!
Scritto da: Peter S.
Great precision point nail gun
This nail gun comes with 2 tips - one for framing (which has an adjustable depth guage) and one for precision nailing. The precision tip is 100% accurate. Works great for nailing strapping and joist hangars.
Scritto da: In2Trux
Cost savings having two nail guns in one. A framing gun + joist hanger gun
Works great. Very commercial grade. Feels heavy duty. Convenient and quick reload. Somewhat inconvenient switching interchangeable tip and trigger for use on joist hangers, hurricane straps, but having both in one nail gun is definitely a cost savings.
Scritto da: Matthew
Reliable, good quality.
Good quality framing gun. Had this gun for awhile and have had no issues. Shoots nails in LVL beams with ease. Only issue I have is the nail holder that pushes the nails up, pushes the nails out of the slide from time to time. Which can get a little annoying.
Scritto da: JSH
Leaking
Leaking after 5 uses.

Σχετικά προϊόντα

hot
Metabo HPT Metal Connector Nailer
3.8/5

€ 480.65

Metabo HPT Metal Connector Nailer
3.8/5

€ 480.65

hot
Metabo HPT Palm Nailer
3.7/5

€ 83.85

Metabo HPT Palm Nailer
3.7/5

€ 83.85

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array