Ingersoll Rand 311A ​​6" Orbital Air Dual-Action Quiet Trian, Heavy Duty, 10.000 RPM, Χαμηλοί κραδασμοί, Finish Free Finish, Ρυθμιζόμενος ενσωματωμένος ρυθμιστής 311A ​​Heavy-Duty Air Dual-Action τριβείο

Brand:Ingersoll Rand

3.5/5

149.66

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Το αθόρυβο τροχιακό τριβείο Ingersoll Rand 311A ​​Heavy Duty Air Dual Action σας προσφέρει την ισχύ και την ακρίβεια που χρειάζεστε για εκλεπτυσμένη εργασία με λεπτές λεπτομέρειες. Ιδανικό για μπορντούρες φτερών, προετοιμασία μετάλλων και εργασίες φινιρίσματος σε πλήρωση σώματος, αυτό το τροχιακό τριβείο διαθέτει ενσωματωμένο σιγαστήρα που καταπνίγει τον θόρυβο καθώς εργάζεστε και κίνηση δίσκου διπλής δράσης που παράγει φινιρίσματα χωρίς στροβιλισμούς. Με βάρος μόλις 4 κιλά, δεν θα σας φθείρει καθώς εργάζεστε. Ένας ρυθμιζόμενος ενσωματωμένος ρυθμιστής προσφέρει θετικό έλεγχο ταχύτητας. Αυτό το μοντέλο τριβείου παρέχεται με περιορισμένη εγγύηση 1 έτους. AMAZON.COM Μέρος της πιο ολοκληρωμένης σειράς εργαλείων φινιρίσματος αέρα του κλάδου, το Ingersoll Rand 311A ​​Heavy-Duty Six-Inch Dual-Action Quiet Air Trinder συνδυάζει όλες τις τελευταίες εξελίξεις για εξαιρετικό έλεγχο και λαμπερές επιφάνειες. Κάθε λεπτομέρεια αυτού του εύχρηστου εργαλείου έχει σχεδιαστεί για να κάνει την εργασία σας πιο γρήγορη και εύκολη, ώστε να μπορείτε να κάνετε περισσότερα χωρίς να θυσιάζετε την άνεση ή την ποιότητα. Το τριβείο διπλής δράσης δημιουργεί φινιρίσματα χωρίς στροβιλισμούς Με το 311A, έχετε τη δύναμη και την ακρίβεια που έχετε χρειάζεται να ολοκληρώσετε εξελιγμένες εργασίες. Συμπαγές, φορητό και σχεδιασμένο για μεγάλη διάρκεια ζωής, αυτό το τριβείο διπλής δράσης δημιουργεί φινιρίσματα χωρίς στροβιλισμούς, καθιστώντας το ιδανικό για μπορντούρες φτερών, προετοιμασία μετάλλων και εργασίες φινιρίσματος στο γέμισμα σώματος. Ισορροπημένη, αθόρυβη λειτουργία για ολοήμερη άνεση Ολοκληρωμένη με 6 Το μαξιλαράκι με διάμετρο ιντσών, το 311A ​​είναι γεμάτο με χαρακτηριστικά που βοηθούν να κάνετε την εργασία πιο ευχάριστη και αποτελεσματική. Πρώτον, ένα μοχλό γκάζι αφαιρεί την πίεση από την παλάμη σας, με αποτέλεσμα λιγότερη κόπωση των χεριών και του καρπού. Επιπλέον, ο ενσωματωμένος σιγαστήρας καταπνίγει τον θόρυβο καθώς εργάζεστε, ενώ η ισορροπημένη κατασκευή ρουλεμάν εξασφαλίζει βελτιωμένο χειρισμό και έλεγχο, καθώς και μεγαλύτερη διάρκεια ζωής. Και με μόλις τέσσερα κιλά, το 311A ​​δεν θα σας βαρύνει, ακόμη και κατά τη διάρκεια ολοήμερων εργασιών. Χαμηλοί κραδασμοί και βέλτιστη ακρίβειαΓια να διατηρήσετε το θόρυβο στο ελάχιστο, αυτό το τριβείο παρέχει χαμηλούς κραδασμούς και αθόρυβη απόδοση. Για μεγαλύτερη ευκολία, υπάρχει ένας ρυθμιζόμενος ενσωματωμένος ρυθμιστής που παρέχει θετικό έλεγχο ταχύτητας--12.000 rpm μέγιστη ελεύθερη ταχύτητα, 17 cfm κατανάλωση αέρα σε ελεύθερη ταχύτητα--για βέλτιστη ακρίβεια.Το 311A ​​υποστηρίζεται από εγγύηση ενός έτους.Ingersoll Rand Εργαλεία αέρα: Αξιοπιστία και ισχύς Είτε εργάζεστε στο κατάστημα, στο γκαράζ ή σε ένα εργοτάξιο βαρέως τύπου, μπορείτε να βασίζεστε στα εργαλεία αέρα Ingersoll Rand για ποιότητα και απόδοση. Τα εργαλεία Ingersoll Rand είναι ισχυρά, ανθεκτικά και εύκολα στη χρήση, μειώνοντας το κέντρο της πόλης και βελτιώνοντας την παραγωγικότητα. Για περισσότερα από 100 χρόνια, τα προηγμένα μοντέλα μηχανικής, κατασκευής και σέρβις της εταιρείας έχουν θέσει ένα πρότυπο αριστείας. Εμπιστευτείτε την Ingersoll Rand για να σας βοηθήσει να ολοκληρώσετε την εργασία σας πιο γρήγορα και πιο εύκολα από ποτέ. Τι περιλαμβάνει το αθόρυβο τριβείο αέρα BoxIngersoll Rand 311A ​​Heavy-Duty Six-Inch Dual-Action Quiet Air Trinder και το εγχειρίδιο. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Το αθόρυβο τριβείο διπλής δράσης Ingersoll Rand 311A ​​Heavy Duty Air σάς προσφέρει την ισχύ και την ακρίβεια που χρειάζεστε για εκλεπτυσμένη εργασία με λεπτές λεπτομέρειες. Ιδανικό για μπορντούρες φτερών, προετοιμασία μετάλλων και εργασίες φινιρίσματος στο γέμισμα σώματος, αυτό το τριβείο διαθέτει ενσωματωμένο σιγαστήρα που σβήνει τον θόρυβο καθώς εργάζεστε και κίνηση διπλής δράσης που παράγει φινιρίσματα χωρίς στροβιλισμούς. Με βάρος μόλις 4 κιλά, το τριβείο Ingersoll Rand 311A ​​δεν θα σας καταπονήσει καθώς εργάζεστε. Ένας ρυθμιζόμενος ενσωματωμένος ρυθμιστής προσφέρει θετικό έλεγχο ταχύτητας. Το τριβείο περιλαμβάνει περιορισμένη εγγύηση 1 έτους. Δείτε περισσότερα

ΕΓΓΥΗΣΗ: Το IR 311A ​​Heavy-Duty 6-ιντσών Dual-Action Quiet Air Trinder υποστηρίζεται από περιορισμένη εγγύηση ενός έτους. ΡΥΘΜΙΖΟΜΕΝΟΣ: Ο ενσωματωμένος ρυθμιστής είναι ρυθμιζόμενος, παρέχοντας θετικό έλεγχο ταχύτητας μέγιστης ελεύθερης ταχύτητας 12.000 rpm και κατανάλωση αέρα 17 cfm σε ελεύθερη ταχύτητα για βέλτιστη ακρίβεια. ΧΑΜΗΛΗ ΔΟΝΗΣΗ: Το πνευματικό τριβείο τροχιάς είναι χαμηλών κραδασμών και ελαφρύ μόνο 4 λίβρες, ώστε να μπορείτε να εργάζεστε πιο γρήγορα και πιο εύκολα και να κάνετε περισσότερα χωρίς να θυσιάζετε την άνεση ή την ποιότητα. ΑΘΟΡΥΒΗ, ΙΣΟΡΡΟΠΗΜΕΝΗ ΛΕΙΤΟΥΡΓΙΑ: Το ενσωματωμένο σιγαστήρα καταπνίγει τον θόρυβο, ενώ η ισορροπημένη κατασκευή ρουλεμάν παρέχει βελτιωμένο χειρισμό, έλεγχο και ανθεκτικότητα. POWER plus PRECISION: Συμπαγές, φορητό και μακράς διαρκείας, το τριβείο διπλής δράσης 311A ​​δημιουργεί φινιρίσματα χωρίς στροβιλισμούς, καθιστώντας το καλύτερο για μπορντούρες φτερών, προετοιμασία μετάλλων και εργασίες φινιρίσματος στο γέμισμα σώματος.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Ingersoll Rand
Brand ‎Ingersoll Rand
Color ‎Factory
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 972 ratings 4.4 out of 5 stars
Grit Number 1
Grit Number ‎1
Grit Type Medium
Grit Type ‎Medium
Horsepower ‎0.25
Included Components ‎Manufactuered Brand Product
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9.76 x 10.5 x 6.4 inches
Item Dimensions LxWxH ‎9.76 x 10.5 x 6.4 inches
Item model number ‎311A
Item Package Quantity ‎1
Item Weight ‎4.2 Pounds
Manufacturer ‎Ingersoll Rand
Maximum Rotational Speed ‎10000 RPM
National Stock Number ‎5130-01-569-4077
Part Number ‎311A
Power Source Hand Powered
Power Source ‎Hand Powered
Product Dimensions ‎9.76 x 10.5 x 6.4 inches
Size ‎One Size
Special Features ‎Quiet
Style ‎311A Heavy-Duty Air Dual-Action Sander

3.5

13 Review
5 Star
71
4 Star
15
3 Star
4
2 Star
3
1 Star
7

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: carl wilkes
AAA+++
great
Scritto da: JHON ALMONTE
Good item
Thanks
Scritto da: KC
Nice tool, a little bit of an air hog
Using for an autobody project. Nice quality tool but you better have 7hp+ to get the full advantage of this tool.
Scritto da: Starlock
Almost what I needed.
I bought this to sand my jeep so that I could raptor line it. It is very quiet and consistent but you cant put much pressure to it or the wheel stops. I have a 60 gal compressor and even that was having a hard time keeping up. My recommendation is only get this if you have 80 gal+ compressor with 3/8" fittings for greater airflow. Its also a bit heavy after some time.
Scritto da: Michael
Wonderful sander, IF you have enough air. Updated when It failed.
I've used this DA sander much of the day for several days now. It is a pleasure to use, and does a great job. I am moving between an 80 gallon Curtis and a 60 gallon Husky, and keeping them both busy. This is the only air tool I've ever used that stressed the Curtis. Realize that you will only enjoy this tool if you have a fairly big compressor. UPDATE: After two years of very frequent use, the sander air regulator (the little thumbwheel on the side) snapped off, but in a fairly open position. Yes, I oiled it every time I used it, without fail. I used it until the remainder of the regulator blew out - like a bullet. The part is plastic, a weak point for this sander, and is readily available. I just ordered two. Don't throw out your broken Ingersoll Rand DA; parts are easy to find.
Scritto da: Sheila L
My 87 yr old father said it’s just like what he used for many yrs. ????????
My 87 yr old dad uses this for making his wooden canes/ walking sticks that he gives away to family, friends & even strangers that he meets. I was very glad to find one that resembled the one he used for 50 yrs. It recently quit operating so this is his replacement. He ❤️‘S it!
Scritto da: ML
Good Support from I-R
The I-R 311A DA Sander arrived overnight, which was great. The stud on the pad was setting on an angle, which was not great; the pad would not seat, and it wobbled. (This stud issue had been described in reviews.) Contact with I-R customer support generated an immediate response, and I-R shipped a new pad. I bought a Neiko pad through Amazon to avoid the delay; the I-R part arrived in a week. I am pleased with the tool. In its price range, I-R delivered. Customer support was excellent. I'm going for five stars on this one.
Scritto da: C. Gregory
Remove quick connects, it becomes a beast
At first, this sander totally sucked. It wouldn't rotate fast nor sand more than a small amount on the edge. I tried to add my two compressors together which didn't help at all. I even went to wally mart to get a smaller sander, which worked better. After reading online, it dawned on me that my issue was probably the industrial quick connects I was using. I removed everything from my line, connected hose straight to compressor, then hose to sander. I then turned on compressor. E voila! Sander finally had enough juice. I like quick connects, so I will have to swap my industrial connectors to automotive or high flow connections or couplers. Also, if you didn't notice, there is a piece of plastic on the sander pad screw connector. It took me a few minutes trying to figure that out. I hope this helps someone in the same boat of frustration I was in
Scritto da: Brian
Uses too much air
I have a 5.hp. industrial compressor with an 80 gallon tank, and this sander eats up a lot of air. I've always owned Ingersol Rand tools, but not happy with this purchase. Won't even start to oscillate unless the air pressure is at least 120 psi. I keep my compressor at 150. And it's all it can do to keep up with this sander. All of my other tools work perfect...impact gus, air ratchet, die grinder, rust buster, air drill, air grinder. Hate to say it, but this sander is garbage.
Scritto da: Matthew
Great tool just needs a little modification.
This is a great tool to run a cupped wire brush. As a sander it is crap. Get a machinist to drill out and tap a 5/8nc bolt with a 7/16nf hole to make a reduced bushing adapter. Once you use this to clean gasket surfaces, prep parts etc. It will change your life. With the speed control you will not throw wire everywhere like with the high speed of an angle grinder. Also works well with sanding flap discs 4.5” or 5” grinder.
Scritto da: Paul
Junk
Absolutely nothing but Junk. Spend your money on quality. Can’t get enough power from orbital. Now can’t take off pad because locking mechanism slips off. Don’t buy Really is junk
Scritto da: Kody
For the price, works!
It's not absolute top of the line, but with the right consumables this thing is perfectly fine. I've used it to buff off decals and get to bare metal. It's quiet, it runs nice, and it feels solid and sturdy. There's not much more to say. Happy with it so far.
Scritto da: Todd Zimmerman
Excellent product
I have been using IR products for over 40 years and have always found them reliable and tough. I look forward to using this Vertical grinder, ( I am replacing the one I've had since 1979 ) very smooth action and came as expected

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array