Hillman 59126 Short Jack Nuts (1/4-20) - 15 τεμάχια, ψευδάργυρος

Brand:‎Hillman

3.4/5

40.41

15 τεμάχια ανά συσκευασία λιανικής. Αυτά τα παξιμάδια με κοντό γρύλο έχουν χοντρό νήμα 1 επί 4-20. Φινίρισμα ψευδαργύρου για βελτιωμένη αντοχή στη διάβρωση. Μέρη από χάλυβα υψηλής αντοχής. Η πλήρης ποικιλία περιλαμβάνει επίσης γάντζους τοίχου και κλειδιά τριβής για εγκατάσταση. Οι παραλλαγές παξιμαδιών που περιλαμβάνονται κυμαίνονται από 6-32 έως 1 επί 4-20 σε μέγεθος χονδροειδούς νήματος. Δεν παραμορφώνει ή παραμορφώνει μαλακά πλαστικά ή λεπτή λαμαρίνα.

15 τεμάχια ανά συσκευασία λιανικής. Αυτά τα παξιμάδια με κοντό γρύλο έχουν χοντρό νήμα 1 επί 4-20. Φινίρισμα ψευδαργύρου για βελτιωμένη αντοχή στη διάβρωση. Μέρη από χάλυβα υψηλής αντοχής. Η πλήρης ποικιλία περιλαμβάνει επίσης γάντζους τοίχου και κλειδιά τριβής για εγκατάσταση. Οι παραλλαγές παξιμαδιών που περιλαμβάνονται κυμαίνονται από 6-32 έως 1 επί 4-20 σε μέγεθος χονδροειδούς νήματος. Δεν παραμορφώνει ή παραμορφώνει μαλακά πλαστικά ή λεπτή λαμαρίνα.
Assembled Diameter ‎0.25 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Hillman
Certification ‎An
Color Zinc
Color ‎Zinc
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 595 ratings 4.3 out of 5 stars
Cutting Diameter ‎0.25 Inches
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Zinc
Exterior Finish ‎Zinc
Fastener Type Jack
Fastener Type ‎Jack
Head Style ‎Flat
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎2.4 x 2.6 x 1.6 inches
Item model number ‎59126
Item Package Quantity ‎1
Item Weight ‎0.01 Ounces
Manufacturer ‎The Hillman Group
Material Steel
Material ‎Steel
Measurement System ‎Inch
Metal Type ‎Alloy Steel
Part Number ‎59126
Product Dimensions ‎2.4 x 2.6 x 1.6 inches
Size ‎1/4"-20
Special Features ‎Assortment
Thread Coverage ‎Threaded on One End
Thread Size 1/4"-20
Thread Size ‎1/4"-20
Thread Style ‎Right Hand
Thread Type ‎Un
Usage ‎Sheet Metal

3.4

13 Review
5 Star
66
4 Star
14
3 Star
10
2 Star
4
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Paul Steed
Good value
Worked as advertised
Scritto da: Chris
A little weak...
These work fine, but the inner threads are quite thin. When installing these with a 1/4" bolt and box wrench, ai had more than one where they went from "snug" to "inner threaded portion broke in half" in about a quarter turn. So, they will work fine for light duty, but need to be careful when installing and don't depend on them to hold a lot of weight.
Scritto da: G. Thorne
Good for perforated square metal tube
I had an application where I needed to mount a latch on a post that was bolted into concrete. The opposite side was attached via tapcon to some concrete block, so I wasn’t able to through-bolt the latch. These fit right in the holes in the tubing, and held secure when expanded. I found it easier to put the screw in and expand the nut all the way out, since I had to hold it with needle nose pliers to keep it from spinning. But then I backed out the screw, and mounted the latch using the same screw. Worked like a charm, and seems to hold well now. Hope this helps someone.
Scritto da: Timothy coleman
Awesome product
Worked as advertised
Scritto da: Don
jack nut
ordered wrong size returned
Scritto da: Amazon Customer
Sturdy
Simple and easy to use.
Scritto da: funrok
works
used on reloading stand , not very durable but if your gentle works good
Scritto da: mrhavi
Nice
A+
Scritto da: brian gilbertson
Weak threaded section.
The threaded part is only 2 or 3 threads long, and it's very easy to overtorque the screw and rip out the threaded section. Threads should be at least twice as long.
Scritto da: Junior
écrou pour tôle
J'ai utilisé cet article pour fixer des rideaux de gazebo plus solidement à la structure et je suis très satisfait du résultat.
Scritto da: Yves Mercier
Trop faibles
J’ai tenté des les installer dans un panneau d’aluminium de 1/8po et dans un panneau de fibre de verre de 1/8po. Ça n’a pas fonctionné dans les 2 cas car ces écrous sont trop faibles. Soit ils se brisent en 2 morceaux, soit les filets s’aplatissent et laissent le boulon tourner sans fin.
Scritto da: Amazon Customer
Good
Works good
Scritto da: Michael Cochrane
not the greatest
Just want to mention these are thin stamped steel and not for high strength applications. They'd be ok for holding on trim, body panels, or light duty applications. To install properly you WILL need an installation tool (there are plenty of videos on youtube on how to make one cheaply). Don't even try to use them without it. You need a hole oversize to insert them then the hole is too big to hold the jack nut from spinning.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array