Γυαλόχαρτο JET Ready-to-Cut, 180 Grit (60-9180)

Brand:Jet

3.3/5

226.66

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Προσήμανση για κοπή. Χωρίς συναρμογές, ραφές ή σπασίματα. Προμηθευτείτε αυτό το γυαλόχαρτο εγκεκριμένο από OEM, το οποίο εγγυάται τα καλύτερα αποτελέσματα. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Κάθε Ready-to-Cut(tm) περιέχει ένα ρολό λειαντικού υλικού το οποίο είναι προσημασμένο και χρωματικό. Κάθε Ready-to-Cut(tm) λειτουργεί με οποιοδήποτε τριβείο Performax - απλά βρείτε το χρώμα που αντιστοιχεί στο μέγεθος του τυμπάνου σας και κόψτε κατά μήκος της γραμμής. Θα εξοικονομήσετε χρόνο και χρήμα με το Ready-To-Cut(tm), γιατί είναι εγγυημένο ότι δεν θα έχει σπασίματα, χωρίς συναρμογές και χωρίς ραφές, απλά τέλεια εφαρμογή κάθε φορά! Αποδίδει 19 περιτυλίγματα σε τύμπανο 16 ιντσών. 12 σε 25 ίντσες. 14 σε 22 ιντσών και 8 περιτυλίγματα σε τύμπανο 37 ιντσών.

JET Red Assurance Guarantee: Υποστηρίζεται από την κορυφαία στον κλάδο εγγύηση 90 ημερών της JET. Ποιότητα κατασκευής: Υπερήφανη κατασκευή στις ΗΠΑ. Προσημασμένο για κοπή: Αποδίδει 19 περιτυλίγματα σε τύμπανο 16 ιντσών. 12 σε 25 ιντσών. 14 σε 22 ιντσών. και 8 σε 37 ιντσών. Λειαντικό λεπτό υλικό: Περιτύλιγμα οξειδίου αλουμινίου 180 grit. Συμβατότητα: Σχεδιασμένο για να ταιριάζει σε τριβεία τυμπάνου JET και Performax.
Backing Type Cloth
Backing Type ‎Cloth
Batteries Required? ‎No
Brand Jet
Brand ‎Jet
Color Red
Color ‎Red
Compatible Devices ‎Drum Sander
Compatible Material ‎Wood
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 5 ratings 4.2 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Grit Material ‎Ceramic Alumina
Grit Number ‎180
Grit Type Fine
Grit Type ‎Fine
Included Components ‎Ready-To-Cut Sandpaper
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎60-9180
Item Package Quantity ‎1
Item Weight ‎4.19 pounds
Manufacturer ‎Performax
Material ‎Aluminum Oxide
Part Number ‎60-9180
Product Dimensions 12"L x 12"W
Product Dimensions ‎11.6 x 12.2 x 4.2 inches
Product Dimensions ‎12"L x 12"W
Unit Count ‎1.0 Count
Warranty Description ‎90 Day

3.3

2 Review
5 Star
22
4 Star
78
3 Star
0
2 Star
0
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Rojo
It works
It is sanding paper, it works, markings are accurate
Scritto da: J. Mikkelson
Effective, but burns on some woods
I couldn't believe that there were still no reviews on this item, which I have been using in my one-man shop for several years now on a Performax 16-32. Overall, it's a great option. Cutting is straightforward, using the color-coded lines for your particular drum, though I think there is a dark green line that can be easy to mistake for the black one, which is "my" line. The main problem I have with this is its tendency to develop "hot spots" -- especially on woods such as cherry, with its pitch pockets -- and then proceed to leave a burn line the length of the board as the burn problem snowballs. Once the paper burns, that's it for that spot. You can scrape/chip the burned resin off the drum, but I still mark the spot in pencil on my sander so I don't send something across that spot again. Since I do a lot of rail/stile kind of widths, I can get away with that, but if you were going to use it for lots of wide panels, it could be a different problem entirely. The only remedy I have found, and it's not 100%, is to take *extremely* light passes at a fairly high feed rate. In practice, the paper produces a near-finish quality on woods like mahogany and oak, which can hide finish imperfections fairly well. On maple, walnut, and cherry, particularly dense areas around knots, etc., it leaves very visible straight line scratches that take a good bit of RO sanding at 150-180-220, or a good cabinet scraper, to remove. (If you use a scraper after using this, I would hit the surface with RO at 180 or 220 briefly, and blow or vacuum off the dust, or the residual abrasives from this paper will dull the burr on your scraper in a hurry!) I still think this is a better solution than going to the RO sander straight from the planer, but it can be a board-to-board thing. A side benefit of this kind of abrasive is that, once I need to pull the old one off my sander, it is easy to tear the less worn sections into hand-held size pieces (I usually go about 5" long, and the roll is about 3.5" wide) and use for hand sanding, especially profiles, where the stiffness of the resin/fabric backing is a plus. You can generate some serious heat in a hurry this way, though, so go easy, or wrap your thumb / fingers -- it really is that hot. Overall, a good bet, and it will last you a long time. I'm just finishing my first roll after several years and many, many hundreds of BF through it.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array