Εργαλείο απόδοσης W759 Σετ διάτρησης με ρολό για να αφαιρείτε καρφίτσες με λαβές από ραβδώσεις χάλυβα για καλό κράτημα, 8 ίντσες (5-τμχ)

Brand:‎Performance Tool

3.1/5

63.97

ΕΜΒΕΛΕΙΑ ΑΝΥΨΩΣΗΣ: Ανυψώνει οχήματα από 6 11/16 έως 13. ΧΕΙΡΟΛΑΒΕΣ ΧΑΛΥΒΙΔΕΣ ΚΟΜΜΕΝΕΣ: Προσφέρει σίγουρο κράτημα και μεγάλη διάρκεια ζωής. ΜΕΓΕΘΗ PIN: 1/8, 3/16, 1/4, 5/16 και 3/8. 5 ΤΕΜΑΧΙΑ: Η ποικιλία μεγεθών σας επιτρέπει να χρησιμοποιείτε σε όλα τα είδη μηχανημάτων γύρω από το κατάστημα ή το γκαράζ. ΜΗΚΟΣ 8 ΙΝΤΣΕΣ: Βοηθά να φτάσετε τις καρφίτσες σε βάθος σε εμπόδια περιοχές.

ΕΜΒΕΛΕΙΑ ΑΝΥΨΩΣΗΣ: Ανυψώνει οχήματα από 6 11/16 έως 13. ΧΕΙΡΟΛΑΒΕΣ ΧΑΛΥΒΙΔΕΣ ΚΟΜΜΕΝΕΣ: Προσφέρει σίγουρο κράτημα και μεγάλη διάρκεια ζωής. ΜΕΓΕΘΗ PIN: 1/8, 3/16, 1/4, 5/16 και 3/8. 5 ΤΕΜΑΧΙΑ: Η ποικιλία μεγεθών σας επιτρέπει να χρησιμοποιείτε σε όλα τα είδη μηχανημάτων γύρω από το κατάστημα ή το γκαράζ. ΜΗΚΟΣ 8 ΙΝΤΣΕΣ: Βοηθά να φτάσετε τις καρφίτσες σε βάθος σε εμπόδια περιοχές.
Brand ‎Performance Tool
Customer Reviews 4.1 4.1 out of 5 stars 224 ratings 4.1 out of 5 stars
Item model number ‎W759
Item Weight ‎1.2 pounds
Manufacturer ‎Performance Tool
Manufacturer Part Number ‎W759
Model ‎W759
Product Dimensions ‎10.6 x 0.95 x 0.55 inches

3.1

12 Review
5 Star
60
4 Star
18
3 Star
5
2 Star
4
1 Star
12

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: David K
Wont damage finish
There are better tools out there but they will do the job on a gun and any time it slips off i hane been able to remove the brass mark easily good tool for the money.
Scritto da: Ron s
They work just great
Nice
Scritto da: M. Eames
NOT BRASS! Someone put steel punches in the brass punch package.
I like the punches but I ordered brass and got steel. The magnet proves it. Plus these look like steel. There was no option for seller feedback so that's what this is. The product is good. Looks like the seller pulled a fast one.
Scritto da: Melissa C
Lightweight and Good quality
Full brass
Scritto da: Finestkind
come apart easily
The brass punch part is not too securely attached to the steel handle . Just a crappy pressure fit . Considering that you beat on these with a hammer ,seems they should have put more effort into making sure they stayed together.
Scritto da: Gentle Giant
Needed some punch
I needed to regressed my bearings in my double axle trailer which requires removal of the rear inner bearing. My previous set of brass punches were badly worn so I purchased these to replace them. So far I am very pleased with them and I expect them to last for several years to come.
Scritto da: thomas mcmellon
listed as brass punches, but are steel.
Scritto da: Chris
Worked for awhile, then bent
I used these during the rebuild of my rear (GM 8.6 10 bolt) and front (GM 8.25IFS) differentials. The two largest punches began to bend in the middle after awhile and the third largest actually popped out of its handle. They did their job but are pretty much toast now.
Scritto da: BERNARD THERIAULT
Quality Built
Well made and correct dimensions . The brass is so tight fit, to the metale that I first put a magnet to it to be sur the were not painted on.
Scritto da: Sharlz
They sent the wrong item NOT BRASS
Scritto da: jamie
Not as advertised
These are definitely not brass. Wrong punches
Scritto da: Stigg2065
Nice n sturdy
Good stuff

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array