Δύσκολα ευρήματα στερέωσης 014973271831 Παξιμάδια εξαγωνικής φλάντζας Grade 8, 1/2-13, Τεμάχιο-8

Brand:Hard-to-Find Fastener

3/5

48.45

Διαθέτουμε μεγάλη ποικιλία συνδετήρων ιδανικών για πολλές εφαρμογές στο σπίτι, τη φάρμα, τις επιχειρήσεις, τα αυτοκίνητα και τη βιομηχανία. Οι περισσότεροι από τους συνδετήρες μας έχουν ελαφριά επίστρωση ψευδαργύρου πάνω από χάλυβα δίνοντας ένα πιο ανθεκτικό στη σκουριά φινίρισμα. Πουλάμε επίσης επικαλυμμένα και ανοξείδωτα προϊόντα για πρόσθετη αντοχή στη σκουριά. Διαθέτουμε πολλές ποιότητες συνδετήρων, από χάλυβα χαμηλής περιεκτικότητας σε άνθρακα έως σκληρυμένο, θερμικά επεξεργασμένο χάλυβα. Δεν ισχύουν όλοι οι σύνδεσμοι για όλες τις εφαρμογές, γι' αυτό φροντίστε να δοκιμάσετε διεξοδικά και να λάβετε τη γνώμη ενός αδειοδοτημένου κτιρίου ή πιστοποιημένου κτιρίου ή δομικού μηχανικού προτού βασιστείτε σε αυτούς τους συνδετήρες για οποιεσδήποτε καταστάσεις όπου η αστοχία θα είχε ως αποτέλεσμα ζημιά σε ιδιοκτησία ή σε άτομο.

Τύπος νήματος: 13 (Χοντρός). Στυλ κεφαλής: Hex Washer (3/4 γαλλικό κλειδί). Φινίρισμα: Κίτρινος ψευδάργυρος. Υλικό: Χάλυβας. Διάμετρος: 1/2.
Assembled Diameter ‎1.03 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Hard-to-Find Fastener
Color Yellow
Color ‎Yellow
Country of Origin ‎China
Customer Reviews 3.9 3.9 out of 5 stars 21 ratings 3.9 out of 5 stars
Cutting Diameter ‎1.03 Inches
Domestic Shipping Item can be shipped within U.S.
Drive System ‎External Hex
Exterior Finish Zinc
Exterior Finish ‎Zinc
Fastener Type Flange
Fastener Type ‎Flange
Finish ‎Yellow Zinc
Finish Type ‎Yellow Zinc
Grade Rating ‎Grade 8
Inside Thread Size ‎0.5 inch
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH ‎2.5 x 2.5 x 1.44 inches
Item model number ‎014973271831
Item Package Quantity ‎1
Item Weight ‎4.89 Pounds
Manufacturer ‎Hard-to-Find Fastener
Material Steel
Material ‎Steel
Measurement System ‎Inch
Metal Type ‎Alloy Steel, Carbon Steel
Part Number ‎FLNS8-036-8
Product Dimensions ‎2.5 x 2.5 x 1.44 inches
Size ‎1/2-13
Thickness ‎0.47 Inches
Thread Size 1/2"-13
Thread Size ‎1/2"-13
Thread Type ‎Coarse

3

7 Review
5 Star
60
4 Star
9
3 Star
9
2 Star
11
1 Star
11

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: RfR
Ok if you like having to tap brand new nuts.
Have to tap every one of them. Spun on nicely for a couple of turn but then bound up. Some partial obstruction. Could feel a drag that couldn't be easily overcome but once it was the nut turned another 3/4 turn and dragged again. Had to use my 1/2-13 tap to knock out whatever the obstruction was on all of them. Next time I guess I run to ACE as it is "The Place".
Scritto da: Brian Galusha
These are off-spec
I read a previous review claiming these had to be re-tapped. When I read reviews like that, I figure maybe the customer just got a bad batch or something. Well these definitely need to be re-tapped. After tapping them I, question how well they can 'hold'. I did try to force a bolt onto one of the nuts. I think the bolt re-threaded the nut, however I was unable to get the nut off the bolt. Thus ruining a bolt and a nut. Just know you won't be able to force it to fit - they need to be re-tapped. Had I known how bad these were, I would have looked elsewhere.
Scritto da: Enginerd
Distorted Thread Flange Locknuts!
These are distorted thread flange nuts. That means they will behave like a locknut. They will start to thread easily from the flange side but then will become very difficult when you reach the distorted portion. Do not use with low strength bolts as the high strength threads might damage your bolt.
Scritto da: FishingFool
A winner.
I went to 3 hardware stores in search of these. All they had was a few nylock nuts, and not enough of them. Finding these on Amazon was great. Good product and delivered to my door, plus at a better price. That's hard to beat.
Scritto da: Mac in Michigan
Good set of seven nuts for heavy duty
The seven Hex-nut fasteners appear to be of high quality. Used in an application where the nut will be subjected to being thumped.
Scritto da: John Trautschold
High Quality Nuts
I'm building an airplane and unfortunately the kit didn't include enough of this size nut. I needed Grade 8 nuts and these fit the bill perfectly!
Scritto da: Krip
Good
They are what they are.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array