Curt Manufacturing 56009 Vehicle-Side Προσαρμοσμένη πλεξούδα καλωδίωσης τρέιλερ 4 ακίδων, ταιριάζει σε επιλεγμένα Jeep Grand Cherokee

Brand:Curt Manufacturing

3.7/5

73.29

Εάν το όχημά σας δεν είναι εξοπλισμένο με καλωδιώσεις για τη ρυμούλκηση τρέιλερ, η προσαρμοσμένη καλωδίωση CURT είναι η ιδανική λύση. Μια προσαρμοσμένη πλεξούδα καλωδίωσης -- που ονομάζεται επίσης βύσμα T -- είναι μια απλή ηλεκτρική συσκευή plug-and-play που συνδέεται στο ηλεκτρικό σύστημα του αυτοκινήτου σας και παρέχει μια τυπική, καθολική σύνδεση καλωδίωσης τρέιλερ. Αυτό γίνεται με χρήση δύο ή περισσότερων συνδετήρων συμβατών με OEM ειδικά για το όχημα για σύνδεση στο συγκρότημα του πίσω φανού, εξαλείφοντας την ανάγκη για κοπή, μάτισμα και συγκόλληση κατά την εγκατάσταση. Οι προσαρμοσμένες καλωδιώσεις είναι ειδικά σχεδιασμένες για το όχημα και, ενώ δεν είναι διαθέσιμες για όλα τα οχήματα, προσφέρουν έναν από τους ταχύτερους, ευκολότερους και ασφαλέστερους τρόπους καλωδίωσης ενός οχήματος για ρυμούλκηση. Αυτή η συγκεκριμένη πλεξούδα σύνδεσης παρέχει μια επίπεδη υποδοχή σύνδεσης 4 κατευθύνσεων και έχει σχεδιαστεί για να είναι μια προσαρμοσμένη καλωδίωση που ταιριάζει σε ορισμένα χρόνια του Jeep Grand Cherokee (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε πληροφορίες εφαρμογής). Συνοδεύεται από όλα τα απαραίτητα εξαρτήματα καλωδίωσης για τη δημιουργία αξιόπιστης σύνδεσης καλωδίωσης ρυμουλκούμενου, καθώς και κάλυμμα σκόνης για να διατηρείται ο σύνδεσμος καθαρός όταν δεν χρησιμοποιείται. Έχετε στο μυαλό σας μια εικόνα του επόμενου προορισμού σας -- ίσως είναι το σκάφος που προσγειώνεται στο αγαπημένο σας σημείο ψαρέματος, ίσως είναι ένα κάμπινγκ που έχει θέα σε ένα από τα αριστουργήματα της φύσης ή ίσως είναι το επόμενο μεγάλο εργοτάξιο. Ωστόσο, η μετατροπή αυτής της εικόνας σε πραγματικότητα απαιτεί περισσότερα από μια απλή ονειροπόληση. Χρειάζεται μια σταθερή σύνδεση και τη σωστή ποσότητα ισχύος. Η προσαρμοσμένη καλωδίωση CURT είναι κατασκευασμένη με μερικές από τις πιο εξελιγμένες τεχνολογίες του κλάδου και έχει σχεδιαστεί για εύκολη εγκατάσταση, παρέχοντάς σας ηλεκτρική σύνδεση μεγάλης διάρκειας για τη ρύθμιση του κοτσαδόρου ρυμούλκησης.

Ταιριάζει σε οχήματα 2007 έως 2013. Υποστηρίζεται από περιορισμένη εγγύηση ενός έτους. Περιλαμβάνεται κάλυμμα σκόνης για να διατηρείται το βύσμα καθαρό όταν δεν χρησιμοποιείται. Η επίπεδη έξοδος 4 κατευθύνσεων συνδέει τα πίσω φώτα, τα φώτα φρένων και τα φλας. Ο απλός σχεδιασμός plug-and-play εξαλείφει την ανάγκη για κοπή ή μάτισμα. Συνδέεται στο συγκρότημα πίσω φώτων του οχήματος για να παρέχει μια επίπεδη υποδοχή 4 κατευθύνσεων.
Brand ‎Curt Manufacturing
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 567 ratings 4.6 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item model number ‎56009
Item Weight ‎8.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56009
Model ‎Custom Wiring
OEM Part Number ‎56009
Product Dimensions ‎9 x 4 x 2 inches

3.7

13 Review
5 Star
79
4 Star
12
3 Star
4
2 Star
1
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: TimWells
Works good
Easy to install and works great.
Scritto da: Lake
You dont have to be smarter than a 5th grader.
The install videos on youtube show how easy it us to hook up a new electrical wiring harness for towing took me about 30 minutes to install.
Scritto da: Terrell Tate
Works as intended
It’s a plug and play system. A little hard to get the passenger side pulled through. It is nice they provide a self tapping screw for the ground.
Scritto da: Herb N
Only slight modification for 2013 Jeep Grand Cherokee Overland.
Not a dislike BUT the wires to the tail lights would not fit thru the frame holes without cutting parts of the seam. SO I simply cut the wires long enough to fished the wires down thru the available hole and connected them below the wheel well. Product works excellent and beats $100+ for dealer to reprogram the computer. Now to figure how to hook up the factory installed 4 and 7 receivers to this system. Not too hard.
Scritto da: Scott Bruce
Great product. Worth it.
Installed perfectly in 10 minutes
Scritto da: Vince Borrego
Easy install on 2012 Jeep Grand Cherokee
I bought this in addition to the Curt Manufacturing 13182 Class 3 2 inch receiver for my 2012 Jeep Grand Cherokee. Install was easy and only requires that you remove the rear tail lights to piggy back off the electrical connections for your trailer. What you end up with is a nice looking 4 pole trailer connector that zip ties nicely and out of the way. Same product they use at UHaul and if you're willing to spend 15 min installing it yourself you can save a bundle. With the 2011-2013 Jeep Grand Cherokees the only strange part was removing the tail lights. 2 plastic pins come out which you can use a flat screwdriver to help remove, then you have to pop out the tail light. At first you feel like you're going to break the tail light but don't worry it just requires a bit of pulling. No damage will happen as it snaps in place. Older style tail lights had all screws, whereas the new ones have 2 plastic snap/plugs and then snap into place. I did a google search for '2012 Jeep Grand Cherokee tail light removal" and found several how to's on the Jeep forums and even a youtube video walking you through the process. Would recommend this purchase for those looking for an aftermarket trailer hitch and wiring.
Scritto da: Javier
Excelente
Muy bueno
Scritto da: andrew j tobias
plug in and no cutting of wires
once you unplug the plug its all plug in and run the wire down and thru the brackets holding the bumper and back up on other light and one hooked up using the supplied self tap screw for the ground .you are set to use .they give you more then enough wire to run and the 4 way wire is long enough .worked out perfect and no worries about shorting system with cutting or soldering wires .
Scritto da: Victoria
Easy install keep 2007 gc
Worked perfectly on my Jeep 2007 grand Cherokee. Easy install less than 10 minutes and I have very little to no automotive knowledge. Just have a power drill as it doesn’t say on the instructions that you need to drill the white ground wire to the metal part of the car, but other than that. Easy as pie, works great, and great price when compared to shops and installation prices.
Scritto da: stuart horan
CURT 56009 Custom Wiring Harness
very easy to install, perfect instructions, took about all of 30 minutes and it was all done .all works perfectly highly recommended
Scritto da: Denis
its was really easy to install
no mess with having to solder and cut wires,,its so easy just push in the clips on the wire harness together behind each tail light and than lead the harness down to the hitch, pug in the trailer lights ,,,,
Scritto da: Maziar M.
Good stuff
Perfect fit
Scritto da: caine
Easily installed
Very simple to install .

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array