BUD Industries CN-5704 Die Cast Electronic Accessory, Custom Build Extruded Industrial Structure 4,51 L x 2,5 W x 2,22 H, Grey

Brand:Bud

3.7/5

46.73

Το περίβλημα από χυτό αλουμίνιο BUD Industries CN-5704 είναι ιδανικό για τη στέγαση ορισμένων από τα ηλεκτρονικά έργα που χρειάζεστε υποχρεωτικά. Αυτό το ηλεκτρονικό casting έρχεται με ένα αξιοπρεπές μέγεθος και ένα σχεδιασμένο κάλυμμα. Με υψηλή αντοχή, η χύτευση είναι κατασκευασμένη από κράμα αλουμινίου ADC-12 καθιστώντας το ανθεκτικό σε όλες τις καιρικές συνθήκες. Η αυτοκόλλητη φλάντζα EPDM που χρησιμοποιείται συνδέεται εύκολα στο κάλυμμα. Το μοντέλο φέρει επίσης εσωτερικούς οδηγούς καρτών για την τοποθέτηση πλακών PC ή τη διαμέριση. Το καλύτερο μέρος του CN-5700 Die Cast είναι ότι σας παρέχει την ελευθερία να κατεργάζεστε εύκολα και να τροποποιείτε σύμφωνα με τις ανάγκες σας. Μπορείτε επίσης να ανοίξετε τις τρύπες για να κάνετε τυχόν απαραίτητα εξαρτήματα. Το ηλεκτρονικό αξεσουάρ έχει βάρος 2,56 ουγγιές που το καθιστά αρκετά φορητό. Οι χυτευμένες φλάντζες στερέωσης που βρίσκονται κατά μήκος της κοντής πλευράς του κουτιού του δίνουν ισχυρό κράτημα. Συνολικά, αυτό το χυτό περίβλημα χρησιμοποιεί μια καλή σειρά βασικών χαρακτηριστικών για να βελτιώσει τις καθημερινές σας ηλεκτρονικές ανάγκες.

Δεν υπάρχουν διαθέσιμες μονάδες
Εξωτερικά μέτρα 4-1/2 μήκος επί 2-1/2 πλάτος επί 2-7/32 ύψος. εσωτερικά μέτρα 4-3/8 μήκος επί 2-3/8 πλάτος επί 2-3/32 ύψος. Φυσικό φινίρισμα. 2,22 Υ x 4,51 L x 2,5 W. Η αυτοκόλλητη φλάντζα EPDM προσαρμόζεται εύκολα στο κάλυμμα. Σχεδιασμένο για να πληροί τις αξιολογήσεις NEMA 1, 2, 4, 4x, 12, 13 και IP66.
Brand Bud
Color Gray
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 5 x 2.5 x 2.2 inches
Item model number CN-5704
Manufacturer BUD Industries
Material Aluminum
Product Dimensions 5 x 2.5 x 2.2 inches; 5.8 Ounces
Style No Mounting Bracket

3.7

8 Review
5 Star
80
4 Star
11
3 Star
5
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: bobdesigns4262
awesome
i sell automotive fasteners and fittings. one of our services, we make harnesses, and electrical switching for the car/truck or industrial applications. I searched many different "boxes" to house relays, for custom applications. I was able to place the relay in the box, and have room for the wiring to stay in place and mount the relay almost perfect in the space. due to the type of castings, I wouldn't apply medium or higher pressure, so the box doesn't crack or collapse beating on it. slow drilling with a sharp bit, was all it took to make holes I needed. the best part, it didn't take much to do a simple polish on it. yeah, I could have sanded out the swirls in the casting, but I am trying to keep the price I am selling it for. I don't know about other applications, but I will tell you this wouldn't be a good box for pedals on it. the lid will cave-in under use. used in just protecting a device or switch, it will do great. I will be buying more
Scritto da: EF
Ok if you're looking for a box to put electronics inside
Its on as an electronics project box. Its higher quality than most project boxes. That's not saying much. Waterproof gasket takes some effort to install properly. The aluminum alloy is something I'm not familiar with. Its not your typical cold rolled 6061/6065 though I wish it was. Its more brittle and less impact resistant than the aforementioned alloys. Maybe 7000/8000 series or perhaps just a byproduct of the extrusion.
Scritto da: Jack M.
Met My Expectations
This enclosure is exactly what I was needed for an electronics construction project. Dimensions were accurate,
Scritto da: Number 6
Clean casting and tougher than its light weight implies
I used this to house a battery disconnect switch on an engine project that I have. I had to drill a number of holes in it to accommodate the cabling. I was happy to see how resilient the material was as I drilled and filed it to the shapes I needed.
Scritto da: Gary L. Berry
heavyduty
This turned out to be just what I needed. I used it to put 3 control buttons for my driveway gate. It will probably out last me. Very good product.
Scritto da: Robert M Ruiz
Very good.
It is super sturdy. Has a moisture gasket. Fairly easy to drill. A good product.
Scritto da: Circuit Hacker
An industry standard for hobbyists and professionals
These are cast aluminum enclosures for housing small electronic circuits -- pretty much an industry standard for hobbyists and professionals (I'm both) alike. The price was right and shipping was fast. Unlike a couple of electronics distributors, there was no massive shipping change to get these in two days (I have Amazon Prime). I ordered these to house a couple of impedance-matching baluns I'm building.
Scritto da: Christopher Bart
The best
BUD is the best. I think they are still American made. A fine product. The siddes are designed to slope in a bit, so order a bit large.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array