Βρύση κουζίνας Pfister Pfirst Series 1-Handle με πλευρικό σπρέι, γυαλισμένο Chrome

Brand:Pfister

2.8/5

103.22

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Καινοτομία με εσάς στο μυαλό. Κατασκευάζουμε υδραυλικά είδη για περισσότερα από 100 χρόνια, επομένως γνωρίζουμε μερικά πράγματα για το πώς να βάζετε το νερό εκεί που θέλετε. Ήμασταν οι πρώτοι που διαθέσαμε πολλές καινοτομίες που είναι στάνταρ σήμερα, και έχουμε τα βραβεία να δείξουμε γι' αυτό. Αλλά το όλο θέμα των τακτικών ανθρώπων είναι το αληθινό κλειδί της επιτυχίας μας. Γιατί οι βρύσες είναι μέρος της πραγματικής, καθημερινής μας ζωής, όπως είναι μέρος της δικής σας. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Η Pfister είναι στην ευχάριστη θέση να εισάγει μια οικογένεια αποκλειστικών προϊόντων χονδρικής, τη σειρά Pfirst. Αυτή η οικογένεια περιλαμβάνει μια πλήρη σειρά από βρύσες για κουζίνα, πλυντήριο, τουαλέτα και μπανιέρα/ντους. Ακόμη και ως οικογενειακή συλλογή τιμής ανοίγματος, όλες αυτές οι βρύσες καλύπτονται από την εγγύηση ζωής της Pfister. Ανώτερη σχεδίαση και εξαιρετική αξία...αυτό είναι το θέμα της σειράς Pfirst.

Αριθμός ρυθμίσεων ψεκασμού: 2. Αριθμός οπών βρύσης: 3/4. Σπρέι Pull Out/Down: Ναι. Συμβατό με χαμηλό μόλυβδο: Ναι. Συμβατό με ADA: Ναι. Κατασκευασμένο στην Κίνα. 1.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Polished Chrome
Customer Reviews 3.8 3.8 out of 5 stars 156 ratings 3.8 out of 5 stars
Finish ‎Polished
Flow Rate ‎1.75 Gallons Per Minute
Included Components ‎Product Only
Installation Method ‎Deck Mounted
Is Discontinued By Manufacturer ‎No
Item model number ‎G1343444
Item Package Quantity ‎1
Item Weight ‎2.83 pounds
Manufacturer ‎Pfister
Material ‎Metal
Mounting Type ‎Deck
Number of Handles ‎1
Number Of Holes ‎3
Part Number ‎G134-3444
Product Dimensions ‎9.14 x 9.94 x 6.31 inches
Size ‎Pack of 1
Usage ‎Inside
Warranty Description ‎Guaranteed for life
Water Consumption ‎1.75 Gallons per Minute

2.8

7 Review
5 Star
46
4 Star
20
3 Star
14
2 Star
12
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: PY
Nice basic faucet. Sprayer is chrome, not white.
The product picture shows a white sprayer which makes no sense to me. It comes with a matching chrome sprayer which is very powerful. No leaks if installed properly, smooth on/off operation. The only con is the supply line is very short. If you have a deep sink, it's very difficult to get in there to connect the flexible supply hose. The solution is to connect the supply hoses to the faucet BEFORE mounting. If your supply hoses are more than a couple of years old, it may be hard to reconnect without them leaking so consider replacing both the faucet and the supply hoses at the same time. [...] Tips for replacement installation: Items needed: various wrenches, channel grip for 1/2 nut, plumber's putty, teflon plumbers tape, WD40. Spray the connections with some WD40 to loosen them. Turn off the water and disconnect the 3/8" flexible supply hose nuts from the angle shut off valve. Unscrew the mount and remove the faucet and the supply hose. This is much easier than trying to remove the flexible supply hose crammed behind the sink. If the hose is in good shape, remove it from the faucet or just toss it if you are replacing it. To install, apply some teflon tape to the threads of the 1/2 threads and install the flexible hoses to the faucet BEFORE mounting. Follow instructions for installing. Connect 3/8" connector to angle shut off valve using teflon tape. Important: You will need to use a wrench to lock the faucet's hose in place as you screw in the supply hose. Doing it without locking may destroy the faucet hose if you twist it. Tip: To prevent damaging the sprayer hose from pulling it out too far, tape something to the hose to prevent it from pulling out too far. My old hose was damaged from it being pulled out too far kinking the hose connection in the same spot.
Scritto da: EddieAmazon
I'm 98% sure I installed it fine, since I've installed other sinks without any clunking ...
It "clunks" every time I turn on the water. And the "wand" thingy is has too short of a hose run. About 6" too short, IMO. I would give it 1 star, but I'll give it 3 for benefit-of-the-doubt. I'm 98% sure I installed it fine, since I've installed other sinks without any clunking noise, which usually means there is a loose line somewhere. EDIT: In just a few months time, the handle no longer works properly. You have to swivel it around in weird ways to get it to do cold or hot water. AND,,, it has corroded in spots quicker than the ten year old faucet it replaced. EDIT #2: I'm upgrading this from one star to four. Yes, the handle was wobbly for awhile and eventually fell off. But it turns out this is a 30 second fix. Just remove the teeny red/blue cap from under the front of the handle. Then stick an allen wrench in and tighten the screw. Boom, the handle now feels sturdy and smooth and TIGHT again. I recommend using blue lock-tight to prevent the screw from backing out again. Though I suspect mine was loose from the start since the water had a "clunk" feel when opening the faucet,, right after the initial installation. That is gone now too.
Scritto da: Vista Bill Raley
A Real bargain!
What a bargain! This attractive, well made faucet is certainly priced right. It easily compares to faucets costing twice as much. Before I ordered it, I was concerned that I might be disappointed and would be throwing money away since I need to pay to have it installed. I compared it to other faucets on Amazon and at home improvement suppliers. I kept going back to this one and I am glad I selected it. I have been using this faucet for nearly a month and there is one problem... the hot/cold water mix is hard to adjust. The water is either too cold or too hot. Adjusting it is difficult partially because the handle is shorter that other single handle faucets that I have encountered. Maybe I need to adjust myself to this inconvenience. The faucet is a real beauty, though! January 2016: What a waste of money! The faucet became such that I could not control the water. I bit the bullet and ordered a Delta faucet. Installation cost is the same. Cheap faucet or nice quality faucet. My advice is to spend an extra $20-$40 and get a long lasting good quality faucet. Don't fall for a bargain like I did!
Scritto da: Michael Reinholz
Good bargain
This was a good deal for a three hole sink without a spare hole for a pullout. Works fine but I did have to get new inlet faucet lines as the old ones were wore out. I really recommend you attach the hot and cold water inlet lines to the faucet before you install it. The standard size hole should be big enough to thread through with the hoses connected, but it is a little snug. Just save the plastic pullout hose to connect after it is installed. This hose is a simple push to install, so it can be put in afterwards. If you don't do this, it is going to be very awkward trying to get a wrench up behind the sink to tighten the inlet lines. Also, they are not kidding about removing the aerator on the faucet before tuning on the first time. A bunch of junk comes out for a few seconds after first install. No sense clogging the aerator and filter.
Scritto da: RandR10
Can't Beat it for the Price
Love this. Best part is that it installs on sinks that aren't fitted with a separate sprayer hole. The standard 3-hole sink accepts this fixture fine. I also like that it still has a screw-on fixed spout end unlike the ones that have the removable spout/sprayer combo. We need this to hook up our portable dishwasher fitting (it's a rental, so under-the-counter install is not possible). My wife and I keep forgetting that we have the luxury of a sprayer now and still sometimes try to cram a huge pot under the spout. It's nice when you have that eureka moment and realize you can just pull out the sprayer and use that instead. No leaks have been detected in 3 months of use. One minor thing I feel the need to point out is that there's a little bit of water hammer when you first turn on the faucet. If you use it immediately after that, it's not there, only when it's been sitting without use for a while. It never did that when the old faucet was in place. Hasn't effected performance so far though, so I still give it 5 stars.
Scritto da: Sgt. Zim
Noisy and Low Quality
Install is easy, but there's a constant, repeating water hammer whenever your turn the faucet on. Not a single BAM like most water hammer, but a machine gun-like BAM BAM BAM BAM. It does this on both hot and cold and it's really loud and annoying. Also, the faucet operation isn't very smooth and you have to push a bit hard to turn it off 100%. On top of that, the faucet handle is already wobbling and I've only been using it for a month.
Scritto da: Barbora Baranova
Five Stars
i am satisfied

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array