Bosch VAC004 Εύκαμπτος σωλήνας 2-1/2 ιντσών σε θύρα εύκαμπτου σωλήνα σκόνης 35 mm Μόνο προσαρμογέας σκόνης

Brand:BOSCH

3.3/5

29.89

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Το VAC004 συνδέει εύκαμπτους σωλήνες 35 mm σε εργαλεία που διαθέτουν θύρες για σωλήνες 2-1/2 ιντσών. Τα προσαρτήματα ηλεκτρικών εργαλείων της Bosch σάς βοηθούν να δημιουργήσετε ολοκληρωμένα συστήματα εργαλείων που επεκτείνουν τη χρήση των ηλεκτρικών σας εργαλείων. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Αυτός ο προσαρμογέας σωλήνων κενού συνδέει εύκαμπτους σωλήνες 35 mm σε εργαλεία που διαθέτουν θύρες για σωλήνες 2,5 ιντσών. Μπορεί να χρησιμοποιηθεί με τα ακόλουθα προϊόντα Bosch: * Επιτραπέζιο πριόνι εργοταξίου Bosch 4000 10 ιντσών * Bosch 4410 10 ιντσών Slide Slide Saw * Τραπέζι δρομολογητή πάγκου Bosch RA1180 * Φορητό τραπέζι δρομολογητή Bosch RA1200 * Bosch μοντέλο VAC005 , VAC007 και VAC008

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0000346336405

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης,

Χρησιμοποιείται σε μοντέλα: 4000, 4212, 4410, RA1180, RA1182, RA1200, RA1171, RA1181. Χρησιμοποιείται σε αριθμούς ανταλλακτικών: BB1209, VAC005, VAC006, VAC007, VAC008, VAC021. Συνδέει 35 χλστ. εύκαμπτοι σωλήνες σε εργαλεία που έχουν θύρες για 2-1/2 In. σωλήνες. Επεκτείνει τη χρήση των ηλεκτρικών εργαλείων σας.
Batteries Included? ‎No
Batteries Required? ‎No
Brand BOSCH
Color Black
Color ‎Black
Customer Reviews 4.3 4.3 out of 5 stars 555 ratings 4.3 out of 5 stars
Included Components ‎Unit^Instruction Guide
Is Discontinued By Manufacturer ‎No
Item model number ‎VAC004
Item Package Quantity ‎1
Item Weight 0.11 Pounds
Item Weight ‎1.76 ounces
Manufacturer ‎Bosch
Part Number ‎VAC004
Style ‎Dust Adapter Only
Thickness ‎1 Inches
Warranty Description ‎1 Year

3.3

13 Review
5 Star
68
4 Star
14
3 Star
9
2 Star
2
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Curtis
Fits my table saw perfectly
Needed to improve the vacuum function on my saw, this adapter allows you to connect a vacuum directly to the exhaust to catch sawdust.
Scritto da: Travis Thompson
Great fit for Ridgid Table Saw
Exactly what I needed for my Ridgid Table Saw. It fit on the inside, it wasn’t tight so I added a screw to hold it in place.
Scritto da: THE HAPPY PAINTER
Good
Everything worked like I needed
Scritto da: David Hughes
Perfect for my application.
Perfect fit between my shop vac (Rigid) hose and my Bosch 4100 portable table saw.
Scritto da: Simon Crisp
Useful Adapter, Built Tough!
I have many such adapters so that I can connect different power tools to my dust extractor, this one is especially sturdy.
Scritto da: Nathaniel Allen
It works, but some critique...
Being a Bosch product specifically for the 4100 table saw, I'm just a tiny bit disappointed. The adapter works, but... My shop vac is my dust collector, and I switch my orange Ridgid hose between my Bosch 410p and my Dewalt compound miter saw. Whereas the hose fits the Dewalt without an adapter, for the past year I've been plugging the undersized hose end into the oversized Bosch opening. Barely effective, but better that spewing sawdust into the room. This Bosch adapter fits INTO the tablesaw's exhaust port opening. Not AROUND the exterior, as I expected. This means the hose end creates a lip inside where sawdust collects. Not the worst thing in the world, but something that could have been avoided had this adapter been designed to fit around the outside of the saw's exhaust port. The small end of the adapter is an extremely tight (i.e. difficult to fit) diameter to the hose. Just another 1/32 inch in reduced diameter at the very end would certainly address this complaint. Otherwise, the Bosch adapter interfaces very nicely with the hose. Once all the pieces are fit together, the connections are tight. Dust collection is about as good as can be expected, with the exception of the small amount of build-up left behind in the the saw's exhaust port due to the lip. Disconnection, about half the time, results in the adapter being pulled from the saw, which could have been avoided had the adapter been designer to fit AROUND the saw's exhaust port. In any case, it's better than no adapter, and despite my criticisms, I'm happy have it.
Scritto da: T. Reich
Perfect - Festool Vac to Bosch Router table connection
This is just what I needed. I recently set up a Bosch router table in the shop for periodic use and wanted to add dust collection with a mobile Festool vac we already had on-site. This looked like it'd do the trick and indeed it does; The Festool hose fits snugly in the small end of the adapter and the other end fits snugly in the router table's fence port. Couldn't ask for it to be more simple. Nothing fancy beyond that; It's just a piece of (seemingly durable) plastic that is perfectly shaped to give the above result. Each end is tapered a bit to accommodate tolerance deviations in manufacturing of different hoses/ports, but that's pretty standard on these sorts of things.
Scritto da: Steve
Close fit
The adapter fits perfectly on the table saw, but the receiving end for my shop vac hose is a bit large. I've added a band of thin weather strip to the hose end to snug up that connection.
Scritto da: Harywood
Fits Perfectly
Great fit and low cost. Perfect for my Bosch saw.
Scritto da: Kirby Read
This i# the one
I bought this particularly for my Bosch table saw. It fits perfectly and also fits my shop vac. Now I don’t have to duct tape my vacuum to the saw to keep the dust down.
Scritto da: Doug Sadler
Fits my saw.
The adapters I found at the store didn't fit into the opening on the saw. This one did, so all is great.
Scritto da: Darrell
Depends what your using it for
No threads to put hose on.
Scritto da: Tamara Castonguay
Bosch Quality you expect
Nice fit and feel, and the Bosch quality you expect.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array