BOSCH 85680MC 1/2 In. x 1 In. Μύτη δρομολογητή με ίσια επένδυση διπλού αυλού με μύτη με καρβίδιο

Name: BOSCH 85680MC 1/2 In. x 1 In. Μύτη δρομολογητή με ίσια επένδυση διπλού αυλού με μύτη με καρβίδιο
Brand: BOSCH
SKU: 0000346351873
Price: 69.24 EUR
Availability: InStock

Brand:BOSCH

3.8/5

€
69.24

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Με τον προσαρμογέα περιστροφικού σφυριού BOSCH HA1030 SDS-max to SDS-plus, ο χρήστης έχει την ευκαιρία να επεκτείνει την ευελιξία ενός περιστροφικού σφυριού SDS-max χωρίς να χρειάζεται να φέρει μαζί του ένα πρόσθετο εργαλείο. Ο προσαρμογέας καθιστά δυνατή τη χρήση αξεσουάρ SDS-plus με ένα εργαλείο SDS-max. Ο προσαρμογέας είναι συμβατός με άλλες μάρκες περιστροφικών σφυριών SDS-max. Αυτός ο ανθεκτικός προσαρμογέας ανταποκρίνεται στις επαγγελματικές απαιτήσεις του εργοταξίου. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Μικροκόκκους κόκκων με ρουλεμάν στο επάνω μέρος που τοποθετούνται πάνω σε πρότυπα για δρομολόγηση σχεδίων

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0000346351873

Κατηγορίες Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Αξεσουάρ ρούτερ, Router Bits, Διατρητές ευθ, Σπειροειδής & τελειώματα μπιτ, Στραχύς,

Το ισχυρό πλέγμα και το βαρύ στήριγμα κοπής παρατείνουν τη διάρκεια ζωής του μύτη. Σχεδιασμένο για εργασία με μοτίβα και πρότυπα. Ισορροπημένη κοπή με ελάχιστους κραδασμούς. Ο σχεδιασμός κοπής ελέγχου βοηθά στην ελαχιστοποίηση του κλωτσήματος.

Batteries Required?	‎No
Customer Reviews	4.8 4.8 out of 5 stars 56 ratings 4.8 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎Yes
Item model number	‎85680MC
Item Package Quantity	‎1
Item Weight	‎3.2 ounces
Manufacturer	‎Bosch
Material	‎Carbide
Part Number	‎85680MC
Product Dimensions	‎5.37 x 3.34 x 1.02 inches
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Sofa Kingdom

Buyer beware!!

Though this router bit works great for its intended purpose, I must warn you all about one huge problem that can occur and did to me. There is a very tiny little Allen key nut on the roller bearing. I made my first pass on my subwoofer box and it worked perfectly. But as I was making my second flush cutting pass, the roller bearing slid up the shank in mid cut causing the bit to chew a quarter inch into my cutout. I was so mad because everything was going so well. This is a mistake that can't really be fixed. I mixed up some saw dust and tite bond in hopes that it will fill in the huge gap that this bit caused. I was able to tighten the bearing down but of course it stripped being that it's so tiny. It's 1.5mm or something. I highly suggest you immediately tighten this down before using. Otherwise this worked great ????

Scritto da: Van

Good Value

It worked as advertised.

Scritto da: D. Rice

The only thing I don't like about these bits is the collet with the set ...

This Bosch router bit 1/2 x 1 was purchased to replace the 1/2 x 1 Bosch pattern bit that was part of a 3 piece pattern bit set. The orginal bit I owned failed and the carbide became chipped on the very tip. I used it quite often and I was probably trying to hog out too much material too fast. The only thing I don't like about these bits is the collet with the set screw that holds the bearing in place. I have learned over the years every time I use these bits I always check to make sure the learning is good and tight. I have had the set screw come out in the past, and with a bit spinning at 28,000 rpm good luck finding the set screw! LOL I use blue (serviceable) lock-tite on the set screws now and the problem is not a problem anymore, but I still check them from time to time.

Scritto da: Mitchell

Bosch bits are quality

Sure you can get cheaper bits, but they just won't deliver the same consistent results as Bosch router bits.

Scritto da: Jason Thornton

Worked great

no issues

Scritto da: Walter N Nichols

Bosch quality

My neighbor kept borrowing this bit so I bought him one.

Scritto da: ken lear

Worked great

Exeactly what I needed

Scritto da: hh

BOSCH ROUTER BITS

We've been using the Bosch router bits in our production operations for at least 7 years now. From our experience Bosch is the only manufacturer to builds bits that stay sharp past a single use.

Scritto da: Leonardo Navarro

Excelente !

Nueva y excelente calidad la de Bosch, muy buena broca.