attwood 66547-3 Ανοξείδωτο ατσάλι, ίσια τοποθέτηση βαλβίδας, με αγκαθωτό άκρο, τυπικό μήκος, για σωλήνα εσωτερικής διαμέτρου 3/4 ιντσών

Brand:attwood

3.7/5

60.40

Αυτό το ίσιο εξάρτημα βαλβίδας από ανοξείδωτο χάλυβα Attwood εγκαθίσταται με ασφάλεια και παρέχει μακροχρόνια απόδοση χωρίς διάβρωση. Αυτό είναι ένα αγκαθωτό εξάρτημα τυπικού μήκους για χρήση με εύκαμπτο σωλήνα εσωτερικής διαμέτρου 3/4 ιντσών. Αυτό το εξάρτημα έχει διάμετρο φλάντζας 1 7/8 ίντσας, εξωτερική διάμετρο σπειρώματος 1 ίντσας και μήκος σπειρώματος 2 ίντσες. Η ακίδα έχει μήκος 1 ¼ ίντσες και το συνολικό μήκος του εξαρτήματος είναι 3 3/4 ίντσες. Το μέγεθος του πριονιού οπής εγκατάστασης είναι 1 1/8 ίντσας, υπάρχει σπείρωμα NPSM 3/4 ιντσών και το μέγιστο πάχος κύτους είναι 1 5/8 ίντσα. Η Attwood Corporation είναι ένας βραβευμένος ηγέτης στη μηχανική, τις δοκιμές και την κατασκευή θαλάσσιων προϊόντων υψηλότερης ποιότητας για περισσότερα από 100 χρόνια. Παρέχουμε ασφαλή και αξιόπιστο φωτισμό, συστήματα καυσίμων, συστήματα νερού, καθίσματα και βάθρα, σκάλες κολύμβησης, προσαρμοσμένες ταπετσαρίες και γενικά αξεσουάρ θαλάσσης που είναι εύκολο να εγκατασταθούν και πληρούν τις κανονιστικές ρυθμίσεις.

Εγκαθιστώ. Μέγεθος συγκράτησης: 1 1/8, NPSM νήματος: 3/4, Μέγιστο πάχος γάστρας: 1-5/8. O.D. κλωστής: 1, Μήκος νήματος: 2, Μήκος ράβδου: 1-1/4, Συνολικό μήκος: 3 3/4. Διάμετρος φλάντζας: 1-7/8. Μέγεθος σωλήνα: 3/4 I.D. Το Standard Thread έχει κλωστή πλήρους μήκους για χοντρές γάστρες και εύκολο σφίξιμο.
Brand Name ‎attwood
Color ‎Unspecified
Customer Reviews 4.7 4.7 out of 5 stars 194 ratings 4.7 out of 5 stars
Included Components ‎End Product & Information
Item Dimensions LxWxH ‎9.75 x 10.12 x 4.5 inches
Item Package Dimensions L x W x H ‎4.92 x 2.83 x 2.05 inches
Manufacturer ‎Attwood
Material ‎Other
Model Name ‎Attwood Boating Tools
Number of Items ‎1
Package Weight ‎0.24 Kilograms
Part Number ‎66547-3
Size ‎One Size
Sport Type ‎Boating
Suggested Users ‎unisex-adult

3.7

8 Review
5 Star
81
4 Star
10
3 Star
5
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Rey G.
Easy install and perfect fit.
I recently had my old plastic thru-hull fitting break off at a dock due to heavy wind and strong waves. I decided to change it with something more sturdier. This looks like it should hold up for quite sometime. I restored many things on my boat this year and glad this was available. It fit right in place on my Bayliner Trophy 2002WA and no need to replace the hose since that was a perfect fit as well. Don’t forget to use the marine silicone to help keep it waterproof. I don’t keep the boat docked in a slip so it lives it’s life in and out of the water. This fitting should last for many years.
Scritto da: Handydan
Commercial duty stainless steel
I liked the fact that it is stainless and it is very sturdy. I used this on the wooden / aluminum stern of my boat using a 1 inch diameter hole saw. Very easy installation.
Scritto da: John K.
Nice Quality Part
I used this to replace a white plastic that was original equipment on my boat. The plastic one was brittle and broke easily. This part fit the original hole in the boat and connected to the 3/4 inch hose without problems. Be sure to measure the hole in the boat and the hose size. I used a dial indicator.
Scritto da: notnomis
Get the good stuff so you never have to do the install again.
If you can get two wrenches on this one, you can hold the flange on the hex shaped section and tighten the nut with another wrench. So you can install these yourself! They are nice and shiney and feel well made. I installed these on a 89 Stamas 255Ff for the kitchen and bathroom sinks and the midship ice chest drains.
Scritto da: Israel Monserrat
Great product
High quality product, great for the money
Scritto da: SDS
Nice Solid Fitting. Good Quality
Nice Solid Fitting. Good Quality. Only downside is that there is no rubber gasket included.
Scritto da: Boating Fun
Clean look, will buy again
a little expensive compared to the cheap non-metallic kind but fit my bilge hose just fine. Looks pretty clean on the outside of the hull as well. It came with the lock nut but you will have to get some silicone adhesive that is rated for above/below water line for through hull fittings. I will probably replace the other through hulls with this same style as the need arises.
Scritto da: Ryan L (Certified Reviewer)
Quality stainless steel!
Great replacement good quality stainless steel What else can you say.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array